User's Manual

1. Align the ELEMNT BOLT mount connector (on the back of the ELEMNT BOLT) with the bike
mount. The ELEMNT BOLT should be perpendicular to the bike mount, with the Wahoo logo on
the ELEMNT BOLT facing away from you.
2. Insert the ELEMNT BOLT mount connector into the bike mount.
3. Twist one quarter turn clockwise to secure.
TO REMOVE THE ELEMNT BOLT FROM THE BIKE MOUNT:
1. To remove, grip the ELEMNT BOLT securely and twist one quarter turn anticlockwise.
2. Lift the ELEMNT BOLT out of the bike mount.
Getting to Know your ELEMNT BOLT:
The ELEMNT BOLT interface consists of the following buttons:
Power Button (left side button): Use to power on/off or access the main menu. Easily add your
sensors at any time by tapping the power button and selecting the Add a Sensor.
History Button (bottom left button): Use to display recent workout history and weekly report.
More detailed workout information is available through the companion app when you connect to
wifi (upload of workouts is automatic).
The History button is also used to stop a workout or start a new lap during your ride.
Start Button (bottom center button): Use to start/pause/resume a workout, or toggle Main Menu
items on/off.
Page Button (bottom right button): Press the ‘Page’ button to switch between workout data,
climbing and navigation pages.
Menu Toggle (right side up/down buttons): Use to navigate the Main Menu or quickly see more
or less data by zooming in or out on any page when performing a workout.
LED indicators: LED indicators provide a quick way to see if you’re on pace with important per-
formance metrics. LED indicators can be set to indicate speed, power or HR.
Speed: The middle LED is your current average performance, LEDs to the right mean
higher than average and LEDs to the left mean below average.
Power: The LEDs will indicate your current power zone from left to right. Between 6 and 8
zones may be configured.
HR: The LEDs will indicate your current Heart Rate zone, from left to right.
Additionally, the LEDs are also used for notifications, page indication, turn by turn directions and
Strava Live Segments.
Settings Menu:
Backlight: Toggle On/Off/5 Seconds.
Location: Set to Indoor/Outdoor. (Will turn off GPS and elevation when indoors.)
LEDs: Toggle On/Off.
Sensors: View added sensors or add a new sensor. The ELEMNT BOLT will
automatically try to connect when you hold your compatible sensor nearby.