User's Manual

• For PC users: Plug in your ELEMNT BOLT to your PC via the Micro USB and the internal
memory will function just like a flash drive. NOTE: European Windows 10 requires a patch:
https://www.microsoft.com/en-us/download/details.aspx?id=19153
• For Mac Users: An additional application is required to function as an interface - contact sup-
[e-mail] for more information.
Updating your Device:
App & firmware updates will be installed automatically when a wifi signal is present. Alternatively,
manual installation of app and firmware updates can be accessed via the Settings menu if required.
To perform a manual update:
1. Open the Settings menu on the ELEMNT BOLT.
2. Open System Info menu.
3. Scroll down to Check For Updates.
4. Select Check and download an update, if available. The Version information will read Up to
Date if no updates are available at this time.
NOTE: Automatic updates will only be performed after initial installation or just prior to powering
off, to prevent interfering with your use of the ELEMNT BOLT.
ALERTS/NOTIFICATIONS:
The ELEMNT BOLT can work in conjunction with your smartphone and display notifications dur-
ing your workout, as per your preference. If activated, phone calls, SMS and email alerts (iOS only)
will be temporarily displayed during your ride, and be accessible from the Settings menu. Dismiss
each alert from the Settings menu to view additional alerts. Turn this function on or off by access-
ing the Settings menu on your companion app.
NOTE: This feature requires you to have your phone with you during your ride.
Measuring Temperature:
The ELEMNT BOLT measures temperature during your workout, but occasionally may display
temperatures that differ from the true temperature of your surroundings. For example, this may oc-
cur when the device is placed in direct sunlight, is being charged via an external battery or subject
to sudden changes in temperature.
Multiple Same-Sensors & Data Management:
In the event that multiple same-information sensors are being employed (e.g. two speed sensors),
the ELEMNT BOLT uses a quality of data hierarchy to determine which sensors will be used to
gather data during your workout. In this scenario, if one sensor should fail, the ELEMNT BOLT
will automatically switch to the next data source and continue data gathering. Manual selection of a
duplicated data source is not available.
Adding Sensors:
Add sensors to gather more information during your workout and get a more comprehensive report
about your ride. Sensors can gather a multitude of information such as speed, heart rate, cadence,
power and much more. Adding a new sensor to your ELEMNT BOLT is as simple as waking up