User's Manual

PAIRING THE KICKR CLIMB

Step 1: Ensure KICKR CLIMB and Wahoo Trainer are powered on.

Step 2: Hold down the middle mode button (5) on the KICKR

CLIMB remote until the center LED flashes rapidly

Step 3: Hold the remote next to the Wahoo Trainer until the

center LED flashes twice slowly.

Step 4: The KICKR CLIMB is now paired with your Wahoo

Trainer and will directly receive grade changes when used

with compatible apps or cycling computers.

KICKR CLIMB MODES

The KICKR CLIMB has two modes: Lock and Unlock. Use the middle mode button (5)

to toggle between modes.

Lock Mode: Use the remote’s manual controls for direct tilt control. While the lock LED

is illuminated, external soware will not move the KICKR CLIMB.

Unlock Mode: The KICKR CLIMB reacts to grade changes from external soware like

Zwi and TrainerRoad, or from your ELEMNT or ELEMNT BOLT GPS cycling computer. If

the remote is used to change the grade manually in Unlock Mode, the KICKR CLIMB will

automatically switch to Lock Mode.

COMPLETE YOUR SETUP USING THE WAHOO FITNESS APP

Download: Download the Wahoo Fitness App for free from the Apple App Store or from

the Android Google Play Store.

Setup: Follow the in-app setup guide to complete your profile.

Fitness App. The app will prompt for registration after the initial pairing.

Firmware Updates: Only available when paired with a Wahoo Trainer connected to the

Wahoo Fitness App. The app will check for firmware updates and send them directly to

the KICKR CLIMB via Bluetooth.

(5)