User's Manual

ground connection, the ground is only that of the printed circuit board. The current is
supplied by two 1.5V primary cell in series. The Mesh divided the band into 40 channels with
bandwidth of 1MHz each and channel spacing of 2MHz.
The antenna is SMA pig tail type connected via Hirose U.FL connector to the board.
Frequency range: 2402-2480MHz
Modulation type: GFSK.
Crystals used on board: 32MHz
Mounting: Screwed on the wall or optional pole mount kit.
Getting started
The Anchor is sealed device that is
IP67 protected
Each device is configured from the
factory with a unique ID and has a
unique label for identification.
The device is mounted on various
location using the mounting holes
provided.
On the app assign the anchor to a location using latitude and longitude.