Submittal Sheet

WAL-RICH CORPORATION • SPECIFICATION PAGE
CALL [phone] · www.wal-rich.com · FAX [phone]
Con-Stab® Couplings
Job Name: ____________________________________________
Job Location: ____________________________________________
Contractor: ____________________________________________
Engineer: ____________________________________________
Approval: ____________________________________________
WR# Size Wall Overall Weight Required
Design Features:
- Continental’s patented “ID Seal”
- For underground PE pipe (ASTM D 2513) only
- Made in the USA
Operating Specifications:
Temperature: -20° to 140° F
Pressure: 125 psi
Continental Industries is an ISO 9001 Certified Company.
NFPA 58, LP-Gas Code NFPA 54, National Fuel Gas Code
ICC – International Plumbing Code IAPMO – Uniform Plumbing Code
Approved by the Commonwealth of Massachusetts
D.O.T., Title 49 of the Code of Federal Regulations, Part 192.283 (b)
ASME B31.8-1995 “Gas Transmission and Distribution Piping Systems”
ASTM D 2513 “Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings”
2881000 1/2” CTS .090 Wall 4” 0.32 2888020
2881002 3/4” IPS SDR-11 4” 0.60 2888014
2881004 1” IPS SDR-11 4-1/8” 0.80 2888016
2881020 1” CTS .099/.101 Wall 4-1/8” 0.66 2888022
2881006 1-1/4” IPS SDR-10 6” 1.50 2888006
2881007 1-1/4” IPS SDR-11 6” 1.50 2888007
2881008 1-1/2” IPS SDR-11 5-5/8” 1.75 2888008
2881010 2” IPS SDR-11 6” 2.25 2888010
Thickness Length (lbs.) Chamfer Tool
Overall Length
You must use a
Continental Chamfer Tool
on a Continental Fitting
Always
Match
Pipe Size
& SDR
Continental’s “ID Seal”
- The gripping action occurs on the outside of the pipe, and prevents slip-
page and pipe pullout.
- The seal is formed on the INSIDE of the pipe--where the surface is the
smoothest. Therefore you must chamfer the INSIDE of your pipe!!!
(O-RING)