Brochure

WAL-RICH CORPORATION SINCE 1950
CALL [phone] · www.wal-rich.com · FAX [phone]
25
Con-Stab ID Seal® Fittings have
been sold in the gas, plumbing, and
propane markets since 1990.
Con-Stab® fittings are IAPMO, CSA,
& ICC approved.
Gas
Gas
Gas
CON-STAB® COUPLINGS
CON-STAB® ELBOWS
CON-STAB® TEES
2881000 1/2” CTS .090
2881002 3/4” IPS SDR-11
2881004 1” IPS SDR-11
2881020 1” CTS .099/.101
2881006 1 1/4” IPS SDR-10
2881007 1 1/4” IPS SDR-11
2881008 1 1/2” IPS SDR-11
2881010 2” IPS SDR-11
Con-Stab®’s patented “ID-Seal” is formed on the
INSIDE of the pipe--where the surface is the smoothest.
Therefore you must chamfer the INSIDE of
your pipe with a Continental® Chamfer tool.
From NFPA 54 Section 3.3.5
“An anodeless riser is an
assembly of steel-cased plastic
pipe used to make the transition
between plastic piping under-
ground and metal piping
aboveground.”
Plastic Pipe runs inside
the riser.
Corrosion-resistant
fusion-bonded
epoxy coating
(O-RING)
Always
Match
Pipe Size
& SDR
Always
Match
Pipe Size
& SDR
Always
Match
Pipe Size
& SDR
Inside Seal!
2882000 1/2” CTS .090
2882002 3/4” IPS SDR-11
2882004 1” IPS SDR-11
2882020 1” CTS .099/.101
2882006 1 1/4” IPS SDR-10
2882007 1 1/4” IPS SDR-11
2882008 1 1/2” IPS SDR-11
2882010 2” IPS SDR-11
2883000 1/2” CTS .090
2883002 3/4” IPS SDR-11
2883004 1” IPS SDR-11
2883020 1” CTS .099/.101
2883006 1 1/4” IPS SDR-10
2883007 1 1/4” IPS SDR-11
2883008 1 1/2” IPS SDR-11
2883010 2” IPS SDR-11
W-R Size Wall (CTS) or SDR
W-R Size Wall (CTS) or SDR
W-R Size Wall (CTS) or SDR