Brochure

WAL-RICH CORPORATION SINCE 1950
CALL [phone] · www.wal-rich.com · FAX [phone]
26
Con-Stab ID Seal® Fittings have
been sold in the gas, plumbing, and
propane markets since 1990. Con-
Stab® fittings are IAPMO, CSA, &
ICC approved.
Gas
CON-STAB® MALE
ADAPTERS
4”
18” Overall
Always
Match
Pipe Size
& SDR
2885000 1/2” CTS .090
2885002 3/4” IPS SDR-11
2885004 1” IPS SDR-11
2885020 1” CTS .099/.101
2885006 1 1/4” IPS SDR-10
2885007 1 1/4” IPS SDR-11
2885008 1 1/2” IPS SDR-11
2885010 2” IPS SDR-11
- Standard sizes with 4” long steel MIP stub.
CON-STAB®
CHAMFER TOOL
2888020 1/2” CTS .090
2888014 3/4” IPS SDR-11
2888016 1” IPS SDR-11
2888022 1” CTS .099/.101
2888006 1 1/4” IPS SDR-10
2888007 1 1/4” IPS SDR-11
2888008 1 1/2” IPS SDR-11
2888010 2” IPS SDR-11
- Follow the Arrow! Turn the tool in the direction
of the arrow printed on the tool for a clean, even
chamfer (bevel) on the inside of the pipe.
You must use a
Continental Chamfer Tool
on a Continental Fitting!
LOOK FOR THE “C”
Always
Match
Pipe Size
& SDR
W-R Size Wall (CTS) or SDR
POLY PLAIN-END
MALE ADAPTERS
2885050 3/4” IPS SDR-11
2885052 1” IPS SDR-11
2885070 1” CTS .099/.101
2885054 1 1/4” IPS SDR-10
2885055 1 1/4” IPS SDR-11
2885056 1 1/2” IPS SDR-11
2885058 2” IPS SDR-11
- Standard sizes with 4” long steel MIP stub.
- Plain End can be used with stab couplings,
compression couplings, and fusion fittings.
W-R Size Wall (CTS) or SDR
Gas
Always
Match
Pipe Size
& SDR
W-R Size Wall (CTS) or SDR