Instruction manual

29
5.8 Alarm Menu (Only for WBL400 models)
The possible status screen for this menu are shown below. Note: Alarms produce a top level status
message only. There is no alarm relay available.
Alarm OFF
Alarm LOW ALRM
Alarm HI ALRM
Alarm % Low
This is the % below the blowdown set point that the LOW ALARM will activate. If the set point is
1000 and the % Low setting is 20 then the Low alarm will activate at 800.
Alarm % High
This is the % above the blowdown set point that the HIGH ALARM will activate. If the set point is
1000 and the % Low setting is 20 then the High alarm will activate at 1200.
Figure 15 Alarm Menu
2000 S/cm 68° F
Alarm

HI ALRM
Alarm
Alarm % Low 20
HI ALRM
Alarm
Alarm % High 20
HI ALRM
Alarm OFF
Alarm
LOW ALRM
Alarm Menu
Possible status screens
ENTEREXIT
NEXTPREV.