User Manual

5
GB Operating Manual Light control “PULSE HFMD - Vers. III“
GB Operating Manual Light control “PULSE HFMD - Vers. III“
In-factory setting
The lights are set in-factory in
a way that initially they can be
operated without changing the
settings. To adapt the light to
your individual needs, the parame-
terization functions (see page 8-20)
can be changed accordingly.
Operation
Restoring the
in-factory setting
To restore the default settings,
press one of the two keys [I or II]
while the power supply is swit-
ched on.
The following functions are res-
tored:
- Parameterization functions are
set to the default setting.
- All control parameters are set to
the default setting.
- All control and follow-up times
are set to the default setting.
Operating and
display elements
All operating and setting functions
can be carried out from the column
operating panel (Fig. 3) as well
as from the sensor operating
panel (Fig.4).
The fu n c ti o n s an d se tt i ng s
for the column operating panel
are displayed via the light bar,
the logo background light and
the LEDs [I and II].
The functions and settings of
the sensor operating panel are
displayed via both LEDs.
Note:
Due to its easier operation,
only the operation via the column
operating panel is described in
these instructions.
Fig.3
(Column operating panel)
Fig. 4
(Sensor operating panel)
Key I
Logo
Light
bar
Key II
LED I
LED II
LED II
Key II
LED I
Key I
Sensor