User Manual

20
Mounting
ENG
3. Mounting
CAUTION
Risk of injury caused by a falling or
tilting light.
Personal injury and material damage.
X Mount fastening elements correctly.
3.1 Mounting the fastening
elements
Fig. 1: Fastening element, screw-type fas-
tening.
X Screw the fastening element to the
mounting surface using four suitable
screws.
3.2 Mounting the light to the
fastening element
A
B
Fig. 2: Mounting the light to the fastening
element.
NOTE: The screw B on the side of the
fastening element can be used to make
the opening of the fastening element
larger or smaller.
X Insert the stud A on the light support
into the opening of the fastening ele-
ment, see Fig. 2.
X Tighten the screw B to fix the support,
see Fig. 2.
3.3 Mounting the magnifier cover
CAUTION
Fire risk when the magnifier is not
covered and exposed to sunlight.
Personal injury and material damage.
X When the magnifier is not used,
cover it with the magnifier cover.
Fig. 3: Mounting the magnifier cover.
X Compress the upper part of the magni-
fier cover, see Fig. 3.
X Place the magnifier cover on the mag-
nifier from above and release the cover.
The magnifier cover is clamped to the
light head.