User Manual

22
Positioning
ENG
4. Positioning
4.1 Adjusting the support
CAUTION
Risk of injury caused by a falling or
tilting light.
Personal injury and material damage.
X Hold the light head when unscrew-
ing the pivot screws.
X After positioning the support,
tighten the pivot screws.
NOTICE
Material damage caused by wrong
handling.
Damage to the light.
X Do not move the joints opposite to
the intended direction of rotation.
Fig. 5: Joint and pivot screw.
X Place the light in the desired position.
X Tighten the pivot screw until the light is
fixed in the desired position.
5. Connection
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the light.
X Check whether the mains voltage
matches the nominal voltage and
the frequency specified on the rat-
ing plate and make sure that they
match.
5.1 Connecting the light to the
power supply
X Plug the plug-in power supply unit into
a socket.