User Manual

23
Functions of the light
ENG
6. Functions of the light
Depending on the light model, the light has
different functions. If you want to find out
which functions the light has, see chapter 2
“Model overview”, page 19.
6.1 Operating functions
Switchable
This function can be used to switch the
light on and off.
Dimmable
This function is used to change the bright-
ness of the light.
Light segments
This function can be used to switch the indi-
vidual light segments on and off.
The light segments create a 3D shadow
effect which highlights the structure and
reveals slight defects or fine differences in
the surface structure of an object.
B
B
C
A
Fig. 6: Light segments.
Level Description
1
Light segments A+B+C are lit.
2
Light segments B are lit.
3
Light segment C is lit.
7. Operation
Fig. 7: Switch.
7.1 Switch-on and switch-off
X Press the switch, see Fig. 7.
7.2 Dimming
X Press the switch and keep it depressed,
see Fig. 7.
After about one second, the light will
change its brightness.
As soon as the maximum or minimum
dimming value is reached, the LED in
the switch will flash.
X To change the dimming direction, press
the switch again and keep it depressed.
This will save the set brightness. The
next time the light is switched on, the
brightness saved last will be set.
7.3 Changing the light segments
X Press the switch twice in quick succes-
sion, see Fig. 7.
The next level is switched on.
The set level is saved. The next time the
light is switched on, the level saved last
will be set automatically.