INSTALLATION MANUAL Security Dummy Camera DOW-1 support@walielectric.
Supplied Parts List Dummy Camera A (x1) M4x20 Bolt B (x3) Anchor C (x3) 2
Step 1 Open the cap and insert 2 pcs AA batteries. (Batteries not included) Step 2 Put the cap back. Loosen the screw and rotate to the preferred angle, then tighten the screw. 0° 36 0° 18 A Step 3 Option A Wood Stud 25mm (0.9") Drill holes at the marked positions. Place the Dummy Camera A over the marked screw locations. Insert Screws B into the mounting holes and tighten using a screwdriver. X ø 3mm (ø 3/25") B A Option B Concrete/Brick Wall Drill holes at the marked positions.
We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support. If you have any questions,please contact us. 1-844-SATTLER (18447288537) support@walielectric.com www.walielectric.
