Su p p l i e d P a r t s L i s t (1)TV Plate-a (2)Monitor Bracket-b (1)Plastic Socket-e (1)Metal Pad-f (4)M6x10 Bolt-g (4)Metal Washer-h (3)M8x22 Bolt-i (2)Wire Clip-j (4)Rubber Foot-k (4)M4x12 Bolt-l (4)M4x30 Bolt-m (4)M6x20 Bolt-n (4)M6x35 Bolt-o (4)M8x20 Bolt-p (4)M8x35 Bolt-q (4)M8x50 Bolt-r (4)M4 Washer-s (4)M6 Washer-t (4)M8 Washer-u (4)M4 Spacer-v (1)Tempered Glass-c (8)M6/M8 Spacer-w 2 (1)Allen Key-x (1)Support Column-d (1)Secuity Wire Kit-y
Connecting the Support Column to Tempered Glass St e p 1 c d k 1.1 1.2 i e x f St e p 2 Connecting the TV Plate to Support Column a* Height Adjustable x g h j 2.1 *TV Plate(a) can be installed on wall optionally, wall mounting hardware have not included. 3 2.
Mounting the Monitor Brackets to a TV St e p 3 First of all, make sure the diameter of the Bolt( l to r ) your TV requires. Once you have determined the correct diameter, please see the diagram as below. You will thread the Bolt into the TV using the correct Washer(s,t,u), and using the spacer(v,w) if necessary. Please make sure the Monitor Brackets are vertically centered and level with each other. b l to r s,t,u v,w Attaching TV To TV Plate and Managing the Wires St e p 4 4.3 4.
Attaching the Security Steel Wire to the TV St e p 5 If your TV is located nearby the wall as the Diagram 5a, then a steel wire can be attached for added security. Attaching the two ends of steel wire to the top two holes on the back of TV, shown in Diagram 5b. Wall Diagram 5a Diagram 5b Attaching the another end of steel wire to the wall according to your wall type, shown in Diagram 5c, 5d and 5e. Wood Stud Wall 45m m 3.