Instructions / Assembly

Instruction Manual
IMPORTANT INFORMATION
READ BEFORE ASSEMBLING THIS PRODUCT
Follow the information on the warning labels found on the bunk bed and on the packaging.
Do not remove the warning label from the bed.
Use only a mattress with the dimensions 74-75 in. L x 37.5-38.5 in. W x 6 in. H on the upper
bunk. A mattress with the same dimensions is also recommended for the lower bunk.
The surface of the mattress must be at least 5 in. (127mm) below the upper edge of the
guardrails. Mattress must not exceed the maximum thickness of 6 in.
Always use the recommended size of mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
The use of a water or sleep flotation mattress is prohibited.
Replacement parts, including additional guardrails, may be obtained from any of Walker
Edison Furniture Company’s dealers or by contacting us online at www.walkeredison.com.
DO NOT use substitute parts. Contact the manufacturer or dealer for replacement parts.
Always use guardrails on the upper bunk. If the bunk bed will by placed next to a wall, the
guardrail running the full length of the bed should by placed against the wall to prevent
entrapment between the bed and the wall.
Periodically check that the guardrails, ladders and other components of the bed are in their
proper position, free from damage, and that all connectors are tight.
Always use the ladder to access the upper bunk.
DO NOT allow children under 6 years of age to use the upper bunk.
DO NOT allow horseplay on or under the bed. Prohibit jumping on the bed.
Prohibit more than one person on the upper bunk.
The use of a night light may provide an added safety precaution for a child using the upper
bunk.
STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed that
are not designed for use with the bed; including but not limited to hooks, belts and jump
ropes.
Keep these instructions for future reference.