Item #: DW48D30 Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to insure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place.
Hardware List Dowel Screw Screw Right drawer lock Left drawer lock Screw Screw Bolt Crossbar Left drawer track Right drawer track *Touch-up marker *only included with Walnut Brown version Bolt Dowel
Insert dowels (A) into desk top (1). Screw cam bolts (B) into desk top (1) with a screwdriver. Insert dowels (A) into panel (3). Screw cam bolts (B) into panels (2,3) with a screwdriver.
Insert dowels (A) into panel (4) and divider panels (7,8). Screw cam bolts (B) into panel (4) with a screwdriver. Insert dowels (V) into slat (28).
Fit divider panels (7,8) onto panel (6) using dowels as guides. Fit panel (5) onto panel (3) using cam bolts and dowels as guides. Insert cam bolts (C) into panel (5) and tighten with a screwdriver.
Fit panel (6) with divider panels onto panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (6) and tighten with a screwdriver. Fit slats (10,11) onto panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into slats (10,11) and tighten with a screwdriver.
Insert cam locks (C) into panels (5,6) and slats (10,11). Fit panel (4) into place using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver. Fit slat (9) onto panel (3) using cam bolts as guides. Insert cam locks (C) into slat (9) and tighten with a screwdriver.
Fit slat (28) onto panel (4) using dowel as a guide. Insert barrel nut (T) into slat (28). Secure slat (28) to panel (4) using bolt (U). Note that bolt (U) will screw directly into barrel nut (T). Fit panel (2) into place using cam bolts and dowels as guides.
Insert cam locks (C) into slat (9) and tighten with a screwdriver. Note that two cam locks (C) will be inserted into slat (9). Insert barrel nut (T) into slat (28). Secure slat (28) to panel (2) using bolt (U). Note that bolt (U) will screw directly into barrel nut (T). Cover bolt (U) with cap (W). Insert cam locks (C) into panels (2,3,4) and slat (9). Fit desk top (1) into place using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver to secure desk top (1).
Attach back panel (12) to desk frame using screws (E). Tighten screws (E) with a screwdriver. Attach left drawer lock (G) to drawer side (15) using screws (J). Attach right drawer lock (F) to drawer side (16) using screws (J) . Tighten all screws (J) with a screwdriver.
Attach drawer sides (15,16) to drawer back (14) using screws (D). Insure that the drawer locks are on the interior of the drawer assembly. Tighten screws (D) with a screwdriver. Attach drawer bottom (17) to drawer sides (15,16) and drawer back (14) using screws (D). Tighten screws (D) with a screwdriver.
Attach left drawer track (P) and right drawer track (Q) to drawer bottom (17) as shown above using screws (J). Tighten screws (J) with a screwdriver. Align drawer front (13) with drawer bottom (17). Place hinges (H) into the slots of drawer pieces (13,17) and attach them to the drawer pieces using screws (K). Attach knob (M) to drawer front (13) using bolt (L). Tighten screws (K) and bolt (L) with a screwdriver.
Attach drawer sides (20,21) to drawer back (19) using screws (D). Carefully slide drawer bottom (22) into place along the grooves of the drawer assembly. Screw cam bolts (B) into drawer fronts (18,23) with a screwdriver. Attach knobs (M) to drawer fronts (18,23) using bolts (L).
Fit drawer front (18) onto drawer sides (20,21) using cam bolts as guides. Insert cam locks (C) into drawer sides (20,21) and tighten with a screwdriver. Attach drawer sides (25,26) to drawer back (24) using screws (D). Carefully slide drawer bottom (27) into place along the grooves of the drawer assembly.
Fit drawer front (23) onto drawer sides (25,26) using cam bolts as guides. Insert cam locks (C) into drawer sides (25,26) and tighten with a screwdriver. Note that two cam locks will be inserted into each drawer side. Place crossbars (N) into the larger drawer at desired locations.
Carefully slide the drawer into the desk assembly. Note that you will need to align the metal tracks of the drawer with those on the desk to slide the drawer into place. Carefully slide the remaining drawers into place. Note that you will need to align the metal tracks of the drawers with those on the desk to slide the drawers into place.