Revised 05/2016
Insert the wooden dowel (D) into the drawer side panels (3)(4)(5)(6). Insert the cam bolts (A)(B) into the front panels (7)(8). Insert the cam lock (A) into the top panel (1) and drawer front panel (11). Assemble the drawer knob (J) to the drawer front panel (11) and secure it by screw (K).
Attach the side panels (5)(6) to the back panel (2) and secure it with the cam lock (C). Attach the side panels (3)(4) to the back panel (2) and secure it with the cam lock (C).
Attach the front panels (7)(8) to the side panels (3)(4)(5)(6). Attach the legs (9)(10) to the top panel (1) and secure it with the washer (H), spring washer (G), bolt (E) and wrench (M). Please do pay attention on the (9)(10).
Attach the unit to the top panel (1) as shown. Secure the side panels (4)(5), and back panel (2) to the top panel (1) with cam lock (C).
Secure the side panels (3)(6), and front panels (7)(8) to the top panel (1) with cam lock (C). Secure the side panel (3)(4) to the legs (9)(10) by using washer (H), spring washer (G) , bolt (F) and wrench (M).
Attach the drawer side panels (13)(14) to the drawer back panel (12) by screw (L). Slide the drawer bottom panel (15) into the drawer side panels (13)(14).
Use cam lock (C) to secure the drawer front panel to the drawer side panels (13)(14). Use stickers (N) to cover all the cam locks as desired.
Insert the drawer (11) to the desk as per diagram.