Insert dowels (A) into side panels (1,2). Screw cam bolts (C) into side panels (1,2). Screw cam bolts (C) into top panel (10).
Insert dowels (B) into panels (7,8) and slats (3,9). Insert dowels (A) into slat (3). Attach drawer stopper (M) to slat (9) using screw (P). Insert dowels (A) into slats (6,16). Insert dowels (B) into panel (4) and slat (16). Screw cam bolts (D) into panel (4), drawer fronts (17) and slat (6).
Attach slats (6,16) to panel (4) using cam bolts and dowels as guides. Insert cam locks (E) into panel (4) and slat (16) and tighten with a screwdriver. This will secure slats (6,16) to panel (4).
Further secure slats (6,16) to panel (4) using screws (S). Screw cam bolts (C) into panel (4). Attach drawer stopper (M) to panel (4) using screw (P).
Join panels (7,8) together with slat (9) using dowels as guides. Attach the assembly from the previous step to panel (4) using cam bolts and dowels as guides.
Insert cam locks (E) into panel (7) and tighten with a screwdriver. Insert cam locks (E) into panel (8) and tighten with a screwdriver.
Attach slat (3) to panels (7,8) using dowels as a guide. Attach side panel (1) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam locks (E) into panel (4) and slats (3,6,16) and tighten with a screwdriver.
Attach bottom shelf (5) to side panel (1) using bolts (T), spring washers (U) and washers (V) where indicated above. Tighten bolts (T) with wrench (Q). Attach side panel (2) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam locks (E) into panel (4) and slats (3,6,16) and tighten with a screwdriver. Attach bottom shelf (5) to side panel (2) using bolts (T), spring washers (U) and washers (V) where indicated above. Tighten bolts (T) with wrench (Q).
Screw support leg (22) into bottom shelf (5). Carefully fit top panel (10) into place using cam bolts and dowels as guides.
Insert cam locks (E) into side panel (2), slat (3) and panel (7). Tighten cam locks (E) with a screwdriver. Insert cam locks (E) into side panel (1), slat (3) and panel (8). Tighten cam locks (E) with a screwdriver.
Attach back panels (12) to the back of the console using screws (F). Attach back panel (11) to the back of the console using screws (F). Back panel (11) will overlap the other back panels as shown in insert above.
Cover all visible cam locks with stickers (J) as desired. Attach hinges (L) to doors (14,15) using screws (N).
Attach doors (14,15) to the console using screws (N) at hinges (L). See page 2 for instructions on how to adjust hinges so doors align with console as desired. Attach handles (H) to doors (14,15) using bolts (I). Attach drawer sides (18,19) to drawer back (20) using screws (R). The thin grooves at the base of each drawer piece will align along the inside of the drawer assembly. Repeat this step for the second drawer.
Slide drawer bottom (21) into place along the thin grooves of the drawer assembly. Fit drawer front (17) into place using cam bolts as guides. Repeat this step for the second drawer. Insert cam locks (E) into drawer sides (18,19) and tighten with a screwdriver. Attach handle (H) to drawer front (17) using bolt (J). Repeat this step for the second drawer.
Carefully slide built drawers into the console. Insert shelf support pins (G) into the console at the desired shelf heights.
Carefully place shelves (13) into console. Shelves (13) will rest on the shelf support pins.