TM ® Item # : W60NOR2D Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 04/23/2018 Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. V. The provided glue is to secure wood dowels in place .
Parts List 1 9 10 9 7 8 7 6 5 4 3 2 14 14 13 13 14 14 12 11 Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A Ø8x30mm Wooden dowel 16 pcs B Ø6x35mm Cam bolt 8 pcs C Ø15x11mm Cam lock 8 pcs D Ø6x50mm Bolt 8 pcs E Ø8x5x16mm Shelf support pin 8 pcs F Glass holder 4 pcs G Door stopper 2 pcs Screw 4 pcs J Door Hinge 2 pcs K Door Hinge 2 pcs L Plastic pivot 4 pcs Screw 8 pcs N Bolt 2 pcs P Handle 2 pcs pcs H M Ø3x15mm Ø3x12mm Q Ø4x22mm Handle Bolt 4 R Ø3x17mm Screw 12 pcs S Plastic wedge 12 pcs T Glue tube 1 pcs pcs U Ø30mm Sti
Step 1 B B B B B 1 B B B Attach cam bolt (B) to part (1) with screwdriver. Step 2 A A A A A A A A 3 6 A A 5 4 A A A A A A Insert wooden dowel (A) into part (3,4,5,6). Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 3 4 5 6 2 D x8 W Attach part (2) to part (3,4,5,6) using bolt (D) with hex key (W). Step 4 14 14 2 13 14 V 13 V W V 14 Attach part (13,14) to part (2) using bolt (V) with hex key (W). Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 5 9 10 3 4 9 5 2 6 Slide back panel (9,10) into grooves as per diagram. 1 Step 6 2 3 1 C C 3 C C C C C 5 C 6 4 Attach part (1) to part (3,4,5,6), then insert and secure cam lock (C) to part (3,4,5,6) to lock it. Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 7 S 9 10 9 R S Attach plastic wedge (S) to part (9,10) using screw (R) with screwdriver. Step 8 U 6 U 5 U U 4 3 U Place sticker (U) over holes as per diagram. Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 9 1 G H H Attach door stopper (G) to part (1) using screw (H) with screwdriver. Step 10 E E 4 5 E 6 E E E 3 E E Insert shelf support pin (E) into part (3,4,5,6). Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 11 6 5 7 4 3 7 Place shelf (7) on top of support pin. Step 12 N N 11 P 12 Q Q Q P Q J M M K M M Attach handle (P) to part (11,12) using handle bolt (Q) with screwdriver. Attach door hinge (J.K) to part (11,12) using screw (M) with screwdriver. Attach bolt (N) to part (11,12) with screwdriver. Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 13 1 L L L 2 L L Place plastic pivot (L) over holes as per diagram. Step 14 1 11 2 K M M L Place door hinge (K) into plastic pivot (L) on part (2). Insert top door hinge into plastic pivot (L) on part (1), then slide the door (11) into the bottom hinge (K). Secure door by tightening door hinge (K) using screws (M) with equal pressure. Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 15 1 12 2 J M L M Place door hinge (J) into plastic pivot (L) on part (2). Insert top door hinge into plastic pivot (L) on part (1), then slide the door (12) into the bottom hinge (J). Secure door by tightening door hinge (J) using screws (M) with equal pressure. Step 16 F 4 F 5 F F F x4 Insert glass holder (F) into part (4,5). Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 17 8 Place glass shelf (8) on top of glass holder carefully. Step 18 Final Assembly Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.
