Instructions / Assembly

Table Of Contents

Item #: DBH1

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 01/2012

PAGE 1
Item #: DBH1 Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
PAGE 2
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to insure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are wood dowels, nuts, bolts, washers and screws. V. A Phillips head screwdriver is required for the assembly of this product. VI.
PAGE 3
Parts List
PAGE 4
Hardware List 6 Wrench Wrench
PAGE 5
Insert dowels (A) into crossbars (4,5). Insert nuts (C) into crossbar (4). Attach crossbars (5) to crossbar (4) using bolts (B). Tighten bolts (B) with wrench (H). Bolts (B) will screw directly into nuts (C).
PAGE 6
Insert end caps (6) into crossbars (5) using pre-inserted dowels as guides. 1 Carefully slide legs (2,3) into place along bench top (1).
PAGE 7
G 1 Attach crossbars (5) to legs (2,3) using screws (G). Tighten screws (G) with a screwdriver. Secure legs (2,3) to bench top (1) using bolts (D), spring washers (E) and washers (F). Tighten all bolts (D) with wrench (J).