Item #: WQ42BC3 Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place.
Parts List 9 9
Hardware List Wood dowel Cam bolt Large cam lock Small cam lock Door stopper Round-head screw Door stopper plate Small screw Handle Small bolt Large bolt Door hinge Large screw Shelf support pin Extra-large screw Plastic wedge Medium screw Wrench Glue tube Sticker
Screw cam bolts (B) into top panel (1). Screw cam bolts (B) into panels (3,4) and slat (28). Insert dowels (A) into panels (3,4) and slats (12, 26,27,28).
Screw cam bolts (B) and insert dowels (A) into panels (5,6). Attach door stoppers (E) to panels (5,6) using round-head screw (F). Flip panels (5,6) over and screw in cam bolts (B). Insert dowels (A) into shelves (7,8).
Screw cam bolts (B) and insert dowels (A) into panels (14,15,16,17). Insert dowels (A) into shelves (19,20,21). Screw cam bolts (B) into doors (13,18) and drawer front (24). Attach handles (I) to doors (13,18) and drawer front (24) using small bolts (J). Attach door stopper plates (G) to doors (13,18) using small screws (H).
Attach slats (26,27) to slat (28) using cam bolts as guides. Insert cam locks (C) into slats (26,27) and tighten with a screwdriver. Attach shelves (19,20) to panels (16,17) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (19,20) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf.
Attach shelves (19,21) to panels (14,15) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (19,21) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf. Attach the shelf assembly from Step 8 to door (18) using cam bolts and dowels as guides. Insert cam locks (C) into panels (16,17) and tighten with a screwdriver. Note that three cam locks will be inserted into panel (16) and two will be inserted into panel (17).
Attach the shelf assembly from Step 9 to door (13) using cam bolts and dowels as guides. Insert cam locks (C) into panels (14,15) and tighten with a screwdriver. Note that two cam locks will be inserted into panel (14) and three will be inserted into panel (15). Attach panels (5,6) to panel (7) and slat (12) using cam bolts and dowels as guides. Insert cam locks (C) into panel (7) and slat (12) and tighten with a screwdriver.
Attach shelves (8) to the frame assembly from Step 12, then attach panel (3) to shelves (8) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (8) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf. Attach shelves (8) to the opposite side of the frame assembly from Step 12, then attach panel (4) to shelves (8) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (8) and tighten with a screwdriver.
4 6 5 3 Attach the frame assembly from Step 14 to top panel (1) using cam bolts and dowels as guides. Insert cam locks (C) into panels (3,4,5,6) and tighten with a screwdriver. Slide back panels (10,11) into the frame assembly. Note that the back panels will slide down in the grooves along the back of the frame assembly.
Attach bottom panel (2) to the frame assembly using large bolts (K) and wrench (T). Attach the base assembly from Step 7 to the frame assembly by inserting the dowels of the base assembly into the pre-drilled holes of bottom panel (2).
Attach hinges (L) to panels (15,16) using large screws (M). Attach the door (16,17) assembly to the stand assembly at hinges (L) using large screws (M).
Attach the door (14,15) assembly to the stand assembly at hinges (L) using large screws (M). Insert shelf support pins (N) into the stand assembly at desired shelf height. Carefully place shelf (9) onto shelf support pins (N).
Attach drawer sides (21,22) to drawer back (23) using extra-large screws (P). Slide drawer bottom (25) into the drawer assembly. Attach drawer front (24) to the drawer assembly using cam bolts as guides. Insert small cam locks (D) into drawer sides (21,22) and tighten with a screwdriver. Carefully slide the drawer into the stand assembly.
10 11 10 Secure back panels (10,11) using plastic wedges (R) and medium screws (S).
