BQSPIN Assembly Instructions Revised 01/2019 2018 P.
P.
1 6 14 1 13 1 1 1 13 1 1 1 1 1 1 1 1 7 5 1 2 9 5 2 2 2 2 2 2 2 2 2 12 10 12 2 2 2 2 2 2 2 2 2 12 2 2 2 2 2 11 2 8 2 3 3 12 4 3 Part 1: Spindle Part 2: Slat Part 3: Legs Part 4: Cross bar Part 5: Bracket Part 6: Top rail Part 7: Bottom rail Part 8: Front rail Part 9: Back rail Part 10: Right side rail Part 11: Left side rail Part 12: Feet Part 13: Support beam Part 14: Spindle Support Rail (For assembly use only) P.
Hardware List A 7x70 mm Bolt Black 13 pcs B 3.5x30 mm Screw Black 52 pcs C 3.5x30 mm Screw Black 42 pcs D 7x50 mm Bolt Black 8 pcs E 10x50 mm Wood dowel 08 pcs F 10x40 mm Wood dowel 06 pcs G 10x30 mm Wood dowel 02 pcs H 6x30 mm Wood dowel 04 pcs I 1/4"x60 mm Bolt Black 05 pcs J Washer 05 pcs K Nut 05 pcs L Hex key 02 pcs M Wrench 01 pcs N Spacer 02 pcs O Ø1/4"X50mm Screw Black 04 pcs P Ø1/4 " Union Screw 04 pcs P.
Step 1 F 2X E 5 E 4 9 E F F E F 8 E E H 13 2X E E H Insert wooden dowels (E) into rails (8,9), dowels (F) into parts (4,5) and dowels (H) into parts (13) Step 2 L A L A 3 L 3 A 4 3 Attach legs (3) to cross bar (4) using bolt (A) and hex key (L) P.
Step 3 A L L A 3 8 9 4 3 L A Secure part (4) to part (8,9) using bolt (A) and hex key (L) Step 4 8 11 10 9 Connect parts (10,11) to parts (8,9) P.
Step 05 LL A A 8 11 A L A L A L A 10 9 L A L A Secure parts (10,11) to parts (8,9) with Screw (A). Step 06 12 L O 12 D P L 11 12 L O 8 L D P D P L 12 O L 10 9 L D P 12 O L A ach legs (12) to frame parts (10,11) using screw (O) and Union Screw (P). Union Screw (P) should be on the inside of the bed frame, with screw (O) on the outside of the leg. Tighten by using with hex key (L) on both ends of the screw at the same me. Then use screw (D) and hex key (L) to secure legs (12). P.
Step 07 C 12 C 12 C C C C 8 C 10 12 C C C C 12 C 11 9 C C C 12 Secure feet to frame using screw (C). Secure parts (10, 11) to parts (9,8) using screw (C) Step 08 5 5 7 5 C 5 C 7 Connect parts 5 to part 7. Note the drawing for location of pocket hole. Secure parts (5) to part (7) using screw (C). P.
Step 09 13 13 D L D 6 L 13 6 L D Attach parts (13) to part (6) using bolt (D) and hex key (L) Step 10 1 14x 13 C 13 C C C C C C C C C C C C C 6 Attach spindles (1) to part (6) using screw (C). Pocket holes and screws (C) should be positioned to face away from part (13). To ensure that screws are on the back of the hardboard when assembly is complete. Note- apply downward pressure to each spindle while attaching to part (6) to ensure an even & secure fit. P.
Step 11 D D L 7 L 13 5 C 13 6 1 C 6 C 13 Start at one end of the headboard. Fit large spindle (13) into part (5) and secure with screw (D) and hex key (L). Attach first spindle (1) to first hole in part (7) with screw (C). NOTE- Be sure to align the first 3 spindles into the correct holes before tightening the first spindle. Step 12 13 5 D L 13 5 6 1 7 14 Place the spindle support rail (14) under the spindles (1) to help align each spindle into the correct hole in part (7).
Step 13 13 5 C 7 13 1 5 C Align each spindle (1) with the correct holes in part (7). Secure the first spindle on the opposite end of the headboard with screw (C). Step 14 13 1 6 7 13 14 CC C C C C C C C C C C C While pushing the part (6) and part (7) together to hold the spindles tightly, secure each spindle (1) to part (7) using screw (C). P.
Step 15 D L DL 13 5 Secure the other large spindle (13) to part (5) with screw (D) and hex key (L). Step 16 B N N B NN B B B BB B B 9 B B B 11 B N BB B B B B B B B B B B B B B B B B B B B B B B B B B BB B B B B B B B B B B B 10 2 52X Using the spacer provided (N), place the bed slats (2) evenly along the bed rails (10,11). Attach slats (2) to side rails (10,11) and center rail (4) using screw (B).
Step 17 6 L I L 5 I L 7 I L I G J J K K G 9 J K L 5 I 11 J K J K L I G J M K Insert wooden dowels (G) into frame (9). Attach the base of the headboard (7,5) to the frame (9) using bolt (I), washer (J), and nut (K). Tighten using both the hex key (L) and wrench (M). P.
Step 18 Final Assembly. P.
