Attach supports (4) to legs (1) using bolts (A) as shown. Attach supports (4) to legs (2) using bolts (A) as shown.
Secure wood panels (5) to frame assembly using bolts (B) as shown in the diagram. Join cross beams (6) together using bolt (D) and nut (E) as shown.
Secure cross beam assembly to frame using screws (C). Secure angle iron (F) using bolt (B). (Optional) Insert wall plugs (J) into your wall at the indicated measurements if desired.
(Optional) Secure unit to the wall using screws (K) and washers (L) at the installation points of wall plugs (J) from previous step.