Attach Support Bar (3) to the Legs (1) and secure it with the Long Bolt (A) and the Allen Wrench (L). Please ensure Legs (1) are facing the right direction as diagram. **Please don't t screw it too tight until the completion of Step #3. Upside down the Legs unit (1) and place on top of the Support Frame (4) and secure it with the Washer (H), Spring Washer (G), Short Flat Bolt (F) and the Allen Wrench (L).
Attach the "U" Support Bar (2) to the Legs (1) unit and secure it with the Medium Bolt (B) and the Allen Wrench (L). **Please make sure Step #1 & #2 bolts are tighten now.
Please place the Turning Plate (5) on top of the Support Frame (4) and secure it by the Washer (H), Spring Washer (G), Short Flat Bolt (F) and the Allen Wrench (L) Flip over the Seating Pad (6) and place the Seating Frame (7) on top and secure it by the Washer (H), Long Flat Bolt (E) and Allen Wrench (L)
Insert the Back Metal Tube (8) into the Seating Frame (7) Please secure the Back Metal Tube (8) to the Seating Frame (7) and secure it with the Short Bolt (C) and the Allen Wrench (L).
First attach the "X" bar (9) then the Back Support Bar (11) to the Back Metal Tube (8) for one side and secure it with the Nut (J), Long Bolt (A) and the Allen Wrench (L). Secure the other end of the "X" bar (9) to the Seating Pad (6) with the Short Bolt (C) and the Wrench (L) . **Please don't screw it too tight unti the completion of Step #11 Repeat Step #9 for the other End.
Attach the two "X" bar (9)(10) with the Screw (D), Nut (K), and Wrench (L)(M). In this time please make sure Step #8,9,10 are tighten now. Please upside down the Seating Pad, the Legs Unit and place it on the flat surface as diagram.
Secure the Turning Plate (5) and the Seating Frame with the Washer (H), Spring Washer (G), Short Bolt (F) and the Wrench (L).