Item #: D31S29 Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Parts List
Component List Desk leg 2 pcs Upper crossbar 2 pcs Lower crossbar 1 pc Keyboard tray supports 2 pcs Keyboard tray frame 1 pc Desk glass 1 pc Keyboard tray glass 1 pc 3
Hardware List Wrench 1 pc Small bolt 8 pcs Large bolt 12 pcs Desk feet 4 pcs Rubber suction cups 8 pcs Keyboard tray slider 2 pcs
1 1 Screw desk feet (D) into desk legs (1). Attach upper crossbars (2) to keyboard tray supports (4) using large bolts (C). Ensure that each keyboard tray support is on the correct side (i.e. right or left).
Attach the assembly from Step 2 and lower crossbar (3) to desk leg (1) using large bolts (C). Attach desk leg (1) to the assembly from Step 3 using large bolts (C).
Disassemble keyboard tray slider (F) by first sliding the keyboard tray arm and the keyboard tray bracket apart. Depress the small lever on the keyboard tray bracket and gently pull the two pieces apart. Attach the keyboard tray brackets to keyboard tray frame (5) using small bolts (B). Attach the keyboard tray arms to keyboard tray supports (4) using small bolts (B). Ensure that the open end of each keyboard try arm is at the front of the desk.
Attach rubber suction cups (E) to the desk frame in the designated locations. Carefully slide keyboard tray frame (7) with attached keyboard tray brackets into the keyboard tray arms. Carefully place desk glass (6) on the desk frame, pressing gently to secure the glass to the rubber suction cups.
Slide the keyboard tray frame out and carefully place keyboard tray glass (7) on the keyboard tray frame. Press down gently to secure the glass to the rubber suction cups.
