Screw feet (F) into legs (1,2,3). Screw feet (F) into lower crossbars (4).
Attach crossbars (7) to lower crossbar (5) using short bolts (D). Tighten short bolts (D) with wrench (G). Attach crossbar (4) to crossbars (7) using medium bolts (C). Tighten medium bolts (C) with wrench (G).
Attach lower crossbar (4), upper crossbar (5) and support bars (6,9) to leg (1) using long bolts (A). Tighten long bolts (A) with wrench (G). Attach support bar (9) and lower crossbar (4) to leg (2) using long bolts (A). Attach upper crossbar (5) to leg (2) using bolt (B). Tighten all bolts with wrench (G).
Attach leg (2) and corner frame (10) to support bar (6) from the previous step using long bolt (A). Attach corner frame (10) to leg (2) using medium bolt (C). Tighten all bolts with wrench (G). Attach lower crossbar (4) ,upper crossbar (5) and support bars (6,9) to leg (1) using long bolts (A). Tighten long bolts (A) with wrench (G).
Attach support bar (9) and lower crossbar (4) to leg (3) using long bolts (A). Attach upper crossbar (5) to leg (3) using bolt (B). Tighten all bolts with wrench (G). Attach leg (3) and crossbar (6) to corner frame (10) using long bolt (A) and bolt (C). tTighten all bolts with wrench (G).
Attach glass support (8) to support bar (9) using short bolts (D). Attach medium crossbar (7) to glass support (8) using long bolts (A). Tighten all bolts with wrench (G). Attach glass support (8) to support bar (9) using short bolts (D). Attach medium crossbar (7) to glass support (8) using long bolts (A). Tighten all bolts with wrench (G).
Insert rubber suction cups (E) into the desk frame as shown above. Carefully lay glass (12) into place and gently press on the suction cups to secure.
Carefully lay glass (11) and corner glass (13) into place and gently press on the suction cups to secure.
