Item #: P60CMP Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place.
Parts List
Hardware List Large cam lock Small cam lock Short cam bolt Short wood dowel Large bolt Wrench Long cam bolt Long wood dowel Handle Small bolt Screw Sticker Glue tube
Screw short cam bolts (C) into stand top (1). Attach feet (12) and stand support (11) to stand base (3) using large bolts (E) and wrench (F).
Screw short cam bolts (C) into stand base (3). Insert short dowels (D) into panels (8) on appropriate sides.
Insert short dowels (D) into panels (4,5,6,7) on appropriate sides. Insert short dowels (D) into back panels (9,10).
Attach panels (5,6,7,8) to stand base (3) using cam bolts and dowels as guides. Note that panels (8) are not attached to panels (6,7), but that all panels should align when attached to stand base (3). Secure panels (6,7,8) to stand base (3) by inserting large cam locks (A) into panels (6,7,8) and tightening with a screwdriver. Carefully slide back panel (10) into place at the back of the stand assembly. Use cam bolts and dowels as guides.
7 Insert cam locks (A) into back panel (10) and tighten with a screwdriver. Insert long dowels (H) into panels (6,7,8) and back panel (10). Carefully slide middle panel (2) into place on stand assembly. Use dowels as guides.
A A 10 A A Insert long cam bolts (G) into middle panel (2). Insert large cam locks (A) into panels (6,8) and back panel (10). Tighten with a screwdriver to secure middle panel (2). On opposite end of stand assembly, insert long cam bolts (G) into middle panel (2). Insert large cam locks (A) into panels (7,8) and tighten with a screwdriver.
Attach panels (4,8) to the stand assembly using cam bolts and dowels as guides. Insert large cam locks (A) into panels (4,8) and tighten with a screwdriver. Attach the second set of panels (4,8) to the opposite end of the stand assembly using cam bolts and dowels as guides. Insert large cam locks (A) into panels (4,8) and tighten with a screwdriver.
Carefully slide back panel (9) into place at the back of the stand assembly. Use cam bolts and dowels as guides. 8 8 4 8 9 4 8 Insert large cam locks (A) into panels (4,8) and back panel (9). Attach stand top (1) to the stand assembly using cam bolts and dowels as guides. Tighten large cam locks (A) with a screwdriver.
Screw short cam bolts (C) into drawer fronts (17,18). Attach handles (J) to drawer fronts (17,18) using small bolts (K). Attach drawer sides (13,15) to drawer back (14) using screws (L). Slide drawer bottom (16) into place along the grooves of the drawer assembly. Repeat this step for the second drawer.
13 15 Attach drawer front (17) to the first drawer assembly using cam bolts as guides. Insert small cam locks (B) into drawer sides (13,15) and tighten with a screwdriver. 13 15 Attach drawer front (18) to the second drawer assembly using cam bolts as guides. Insert small cam locks (B) into drawer sides (13,15) and tighten with a screwdriver.
Carefully slide drawers into the stand assembly. Cover all visible cam locks with stickers (M) as desired.