Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert dowels (A) into side panles (3)(4) and slat (12). Screw cam bolts (D) into side panels (3,4). Screw cam bolts (D) into panels (1,9). Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach side panels (3,4) to the slat (12). Insert cam locks (B) into slat (12) and tighten with a screwdriver. Use wrench (N), screw (M) to secure the bottom panel (2) to the side panels (3,4).
Slide back panel (5) into groove. Place the top panel (1) to the side panels (3,4). Insert cam locks (B) into side panels (3,4) and tighten with a screwdriver.
Secure the back panel (5) by using the plastic wedge (I) and screw (J). Use wrench (N), bolts (H) to secure legs (6) into bottom panel (2).
Use screw (G) to secure the drawer side panels (7,8) into drawer back panel (10). Slide drawer bottom panel (11) into groove. Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure handle (E) with bolts (F) into drawer front panel (9). Attach drawer front panel (9) to drawer side panels (3,4). Insert cam locks (C) into drawer side panels (3,4) and tighten with a screwdriver. Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Place sticker (K) over holes as per diagram. Carefully slide the drawer into the stand assembly. To remove the drawer, pull it out and press the small lever on the tray bracket, located inside the tray arm. Then carefully pull the two pieces apart.
Repeat Step #15.