Revised 03/2016
Insert the cam bolts (B) to the top panel (1) and (3)(5) side panels. Insert the wooden dowels (A) into the side panels (3)(4)(5). Insert the cam bolts (B) to the drawer panels (13)(14). Use bolts (P) to assemble the door knob (N) to the drawer panels (13)(14) . Insert the wooden dowel (A) to the support bar (6).
Insert the cam bolts (B) to the bottom panel (2). Secure the metal plate (H) to the legs (11)(12) by washer (G), spring washer (F) and bolts (E). Insert the wooden dowel (A) to the legs (11)(12).
Put the legs (11)(12) across as per diagram. Assemble the legs (11)(12) to the bottom panel (2) by cam locks (C) , bolt (D) ,washer (G), spring washer (F) and wrench (T) as per diagram.
Assemble the support bar (6) to the side panel (3)(5) by using cam locks (C). Place the side panels (3)(4)(5) to the bottom panel (2) and secure it with cam locks (C).
Place the top panel (1) on the top of the side panels (3)(4)(5) and secure it with cam locks (C). Attached the bottom back panel (8) to the back of the console and secure it with screw (Q).
Attached the back panel (7) to the back of the console and secure it with screw (Q). Using screw (R) to assemble the drawer side panel (15)(16) to the drawer back panel (17).
Slot in the drawer bottom panel (21) to the drawer side panel (15)(16) and secure the drawer front panel (13) to the side panel (15)(16) by using the cam locks (C). Repeat step #12 for the other two drawers.
Repeat step #13 for the other two drawers. Use the sticker (U) to cover the cam locks.
Insert the drawers to the console carefully. Insert the support pins (5) to the console and place the removable shelf (9) on top.
Using screw (L) to secure the hinge (K). Using screw (P) to secure the handle (M). Assemble the door (10) to the unit by using screw (L).
Options For sercurity, please remove the drawers and doors and using the Anti-Flip screw (S) set to secure the console agianst the wall.
