Attach cam bolts (B) to parts (1) and (2). Attach cam bolts (B) to part (8). Insert wooden dowels (A) to parts (9, 10) and (19).
Insert wooden dowels (A) into designated areas in parts (3, 4, 5, 6) and (7). Attach cam bolts (B) to parts (3, 4, 5, 6). Attach parts (3) and (5) to part (7), and then attach cam locks (C) to fully assembled part (7).
Attach parts (4) and (6) to the other part (7), and then insert cam locks (C) to the fully assembled part (7). Attach cam locks (C) to parts (13) to panel (2). Attach slat (19) to panel (2) using screw (U) as guides.
Attach cam locks (C) to part (9) to connect part (8), and to part (10) to connect to the other part (8). Use the wrench (S) to use bolts (D) to connect parts (9) and (10) to part (2).
Use cam bolts (C) to connect parts (3) and (5) to part (2). Use cam bolts (C) to connect parts (4) and (6) to part (2).
Slide parts (14) and (17) into designated area. Use cam bolts to connect part (1) to the frame assembly as shown in the diagram.
Attach the plastic wedges (K) by using the screws (L) as shown in the diagram. Attach door stopper (P) to designated areas by using screws (Q).
Place stickers (R) over cam locks as desired. Insert shelf supports (J) and place shelves (15,16) and (18) as shown in the diagram.
Attach hinges (E) to the doors (11,12) by using screws (F). Attach handles (G) to the doors (11,12) by using screws (H). Attach metal stopper (M) using screw (N).
Attach hinges (E) by using screws (F) as shown in the diagram.
