Insert wooden dowel (A) into part (4) ,then secure cam bolt (C) into part (1) with Philips head screwdriver as per diagram.
Using cam lock (B) secure part (4) into part (1) with Philips head screwdriver as per diagram.
Using screw (E) attach part (2) into part (4) with hex key (F) as per diagram.
Using bolt (H) attach part (5) into part (3) with hex key (F) as per diagram. Note : Do not fully tighten all bolts .
Put part (9) into part (7) ,part (10) into part (8) as per diagram.
Using screw (S) attach parts (8,10) to part (5) ,then using screw (E) attach parts (8) to parts (1,2) , with hex key (F) as per diagram.
Using bolt (S) and screw (E) attach side frame to parts (1,2,5) with hex key (F) as per diagram.
Using screw (K) attach part (6) to part (9) with Philips head screwdriver ,then using screw (L) secure both parts (6) with Nut (Q) and Wrench (N) as per diagram.
Place sticker (D) cover the hole as per diagram .
Using bolt (G) attach bracket (J) to part (1) with hex key (F) as per diagram. Note:Fully tighten all bolts.
Using screw (P) attach Flat washer (M) to bracket (J) to Wall anchor (R) to wall with Philips head screwdriver as per diagram.