Item # : AF42JACCT Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 09/07/2019 (E) Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines . Ensure that all parts and hardware are available before beginning assembly. . Follow each step carefully to ensure the proper assembly of this product. . Two people are recommended for ease in the assembly of this product. V. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. V. The provided glue is to secure wood dowels in place .
Parts List 1 6 6 5 5 3 4 3 2 7 7 8 8 8 Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A Ø8x30mm Wooden dowel 12 pcs B Ø6x35mm Cam bolt 6 pcs C Ø15x11mm Cam lock 6 pcs D Ø30mm Sticker 6 pcs E Ø6x50mm Screw 6 pcs F M4 Hex Key 1 pc G Ø6x12mm Bolt 12 pcs H Ø6x25mm Bolt 6 pcs Europe hinge 4 pcs pcs J K Ø3x12mm Screw 4 L Ø3.5x14mm Screw 26 pcs M Door hinge 2 pcs N Knob 2 pcs P Glue tube 1 pc Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly.
Step 1 x2 A A 4 3 A A A A A A Insert wooden dowel (A) into parts (3,4) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 B B B 1 B B B Using cam bolt (B) secure part (1) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 3 2 3 3 C C 1 Using cam lock (C) secure part (3) into part (1) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 4 2 3 3 C 4 C C 1 C Using cam lock (C) secure parts (3,4) into part (1) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 5 6 6 3 1 4 3 Put part (6) into parts (1,3,4) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 6 2 F E 3 4 3 Using bolt (E) secure part (2) into parts (3,4) with hex key (F) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 7 D D Place sticker (D) cover the holes as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 8 7 F 8 8 G 8 7 Using bolt (G) secure part (8) into part (7) with hex key (F) as per diagram. Do not tighten all the bolts . Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 9 7 7 F 2 H Using bolt (H) secure part (7) into part (2) with hex key (F) as per diagram. Adjust the parts out of alignment and tighten all bolts . Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 10 x2 L J L J 5 Using screw (L) secure Europe hinge (J) into part (5) with Philip head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 11 x2 K K N 5 Using screw (K) secure knob (N) into part (5) with Philip head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 12 L L M L J 3 2 L 5 M x2 Using screw (L) secure Europe hinge (J) into parts (2) , then using screw (L) secure door hinge (M) into parts (3,5) with Philip head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 13 If necessary adjust the pre-attached floor levelers at the bottom of metal frame to level the unit. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 14 Final Assembly Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
