AF42TILOVCT TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 23/10/2020(C) Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main type of hardware used to assemble this product are: bolts and screws. V. Power tools should not be used to assemble this product. VI. Drill may be needed for securing product to wall.
Parts List 1 2 3 4 4 4 4 Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A M6x15mm Bolt 20 pcs B M4 Hex key 1 pc Rubber suction cups 4 pcs C Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 1 4 4 3 4 B A Using bolt (A) attach part (3) to part (4) with Hex key (B) as per diagram. Note: Please do not fully tighten all bolts at this step . Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 4 4 A A 4 A A B A A 1 Using bolt (A) attach part (4) to part (1) with Hex key (B) as per diagram. Note: Please do not fully tighten all bolts at this step . Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 C C C 3 C Insert Rubber suction cups (C) into part (3) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 4 2 Place part (2) on the top of part (3) carefully as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 5 4 3 B A Using bolt (A) attach part (3) to part (4) with Hex key (B) as per diagram. Note: Please do not fully tighten all bolts at this step . Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 6 1 4 A B Using bolt (A) attach part (4) to part (1) with Hex key (B) as per diagram. Note: Fully tighten all bolts at this step . Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 7 Final Assembly Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
