Instructions/Assembly Guide

ManualsBrandsWalker Edison ManualsDressers30" Modern 4 Drawer Vertical Storage Chest - Rustic Oak

P.1

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com

Revised 23/10/2020(C)

Walker Edison

BR4DSV

2020

Summary of content (25 pages)

PAGE 1
BR4DSV TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 23/10/2020(C) Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in place.
PAGE 4
Hardware List A Ø8x30mm Wooden dowel 26 pcs B Ø6x35mm Cam bolt 38 pcs C Ø15x11mm Cam lock 18 pcs D Ø15x9mm Cam lock 20 pcs E Ø30mm Sticker 38 pcs F Ø3x12mm Screw 48 pcs G Ø6x50mm Screw 6 pcs H Ø5x15mm Screw 4 pcs J Ø6x35mm Bolt 1 pc K Ø6x12mm Bolt 16 pcs L M4 Hex key 1 pc Handle 8 pcs M N Ø4x22mm Handle Bolt 16 pcs P Ø4x38mm Screw 20 pcs Q Ø4x12mm Screw 1 pc R Ø4x25mm Screw 1 pc S Plastic strap 1 pc T Nut 1 pc Wooden dowel
PAGE 5
Step 1 A A A A U A A 8 11 5 A A 6 A U A x4 A x3 A A A Insert wooden dowel (A) into parts (5,6,8) and wooden dowel (U) into part (11) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 6
Step 2 A A A A B B B B B B B B 1 4 B 7 B B B B B B A B A B B A A Insert wooden dowel (A) into parts (4,7), then secure cam bolt (B) into parts (1,4,7) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 7
Step 3 Slider arm Slider arm Slider bracket V Slider bracket V Pick up the slider arm (V) and separate the slide runner for the following Steps. Extend the slide runner all the way forward,press the plastic release lever of the slider arm up and pull the slide runner complete out . Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 8
Step 4 F F V F V F F F 13 10 x4 Using screw (F) attach drawer slider (V) into parts (10,13) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 9
Step 5 F F F V F F F V F F F F F F F V 4 F F V F F F V V F F 7 F V F F F V Using screw (F) attach drawer slider (V) into parts (4,7) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 11
1 Step 7 2 3 C 4 C 5 C Using Cam lock(C) secure part (5) to part (4) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 12
1 Step 8 2 3 H C 3 C 8 C 8 4 8 Using Cam lock(C) secure part (8) to part (4) ,then using screw (H) attach part (3) to part (4) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 13
1 Step 9 2 3 H C 3 8 C C 7 C 8 C 8 6 C Using Cam lock(C) secure parts (6,8) to part (7) ,then using screw (H) attach part (3) to part (7) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 16
1 Step 12 2 3 1 C 6 5 C C C 7 1 3 J 4 L Using cam lock (C) secure part (1) into parts (4,5,6,7) with Philips head screwdriver ,then using bolt (J) attach part (3) to part (1) with Hex key (L) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 17
Step 13 M B N M N B B 14 N N B x4 B Secure cam bolt (B) into part (14) ,then using handle bolt (N) secure handle (M) to part (14) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 18
Step 14 13 13 P 12 9 10 9 10 P x4 Using screw (P) attach parts (10,13) to part (9) with Philips head screwdriver, then put part (12) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 19
1 Step 15 2 3 D D 11 14 11 13 P 9 D 10 x4 Using screw (P) attach part (11) to part (9) , then using Cam lock (D) attach part (14) to parts (10,11,13) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 21
Step 17 Slider arm OR V Slider bracket Insert the assembled drawers into the unit frame, extend the Ball Bearing Slide Tracks (V) on the pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled drawers with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the drawer does not go in smoothly, please take it out and repeat the step.
PAGE 22
Step 18 Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the bottom of the leg to level the unit . Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 23
Step 19 1 S Q Using screw (Q) attach plastic strap (S) into part (1) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 24
1 Step 20 2 3 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Wall T R S Using screw (R) attach plastic strap (S) into Nut (T) to wall with Philips head screwdriver as per diagram.