Instructions/Assembly Guide

Slider bracket
Slider arm
OR
Step 17
P.21
Copyright
©
2020
, by Walker Edison Furniture Co., LLC. All rights reserved.
V
Insert the assembled drawers into the unit frame, extend the Ball Bearing Slide Tracks (V) on the
pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled drawers
with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the drawer does
not go in smoothly, please take it out and repeat the step. If you need to remove the drawer, please
pull the drawer all the way out,press or lift the plastic release lever and pull out the drawer and then
re-assembled the drawer until it was going in smoothly .