Instructions/Assembly Guide

Step 21
17
17
P.26
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Slider bracket
Slider arm
OR
Z
Insert the assembled drawers (17) into the unit frame, extend the Ball bearing drawer slider (Z) on
the pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled
drawers with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the drawer
does not go in smoothly, please take it out and repeat the step. If you need to remove the drawer,
please pull the drawer all the way out,press or lift the plastic release lever and pull out the drawer
and then re-assembled the drawer until it was going in smoothly .