Hardware List A 仨三三三D 08x30mm Wooden dowel 24 pcs B 倒立:ml 06x35mm Cam bolt 28 pcs c 副 015x11mm Cam lock 28 pcs 04x32mm Screw 9 pcs Handle 1 pc 04x22mm Bolt 2 pcs 030mm Sticker 28 pcs Glue tube 2 pcs 05/16 in Half moon washer 4 pcs 08x60mm Cam b口It 4 pcs D E F G ~ 4阻阻叫 阻四@ 0 H E二二卫? J ♂ K L 售塾 05/16 in Nut 4 pcs M C二3 巨型5/16 in Wrench 1 pc N 啤盹耻=尊 06x50mm Bolt 2 pcs M4 Wrench 1 pc 038mm Plastic cover 4 pcs 03x12mm Screw 12 pcs D
Step 1 Slider arm Slider arm Slider bracket s Slider bracket s Disassemble drawer slider (S) by sliding the slider arm and slider bracket apart. Depress the small lever of the slider bracket and carefully pull the two pieces apart. Repeat this process for both drawer sliders (S). Step 2 R 白川Uγ川U3 营g? Secure drawer slider arms (S) to side panels (7,8) with screw (R). Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Secure slider brackets (S) to drawer side panel (14,15) with screw (R). Secure cam bolt (B) to top panel (1). Insert wooden dowel (A) and secure cam bolt (B) to back panel (2).
Insert wooden dowel (A) and secure cam bolt (B,K) to side frame (3,4). Insert wooden dowel (A) to parts (9,10). Secure cam bolt (B) to drawer front panel (12), then secure handle (E) with bolt (F).
Insert wooden dowel (A) to side panel (7,8) and parts (5,6,17). Secure cam bolt (B) to parts (5,6). Insert parts (9,10) into back panel (2) and parts (11), then insert and secure cam lock (C) to parts (9,10), and use wrench (P) to secure parts (11) to parts (9,10) with bolt (N) to lock them.
Insert parts (5,6) into side panel (7,8), then insert and secure cam lock (C) to side panel (7,8) to lock it. Insert side panel (7,8) into back panel (2), then secure it with screw (D).
Insert side frame (3) into back panel (2) and parts (5,11), then insert and secure cam lock (C) to parts (5), and use wrench (M) to secure back panel (2) and part (11) with half moon washer (J) and nut (L) to lock them. Insert side frame (4) into back panel (2) and parts (6,11), then insert and secure cam lock (C) to parts (6), and use wrench (M) to secure back panel (2) and parts (11) with half moon washer (J) and nut (L) to lock them.
Insert top panel (1) into desk frame, then insert and secure cam lock (C) to back panel (2), side frame (3,4), side panel (7,8), and parts (5,6) to lock it. 13 Insert parts (17) into drawer back panel (13) then secure it with screw (D). Secure drawer side panel (14,15) to drawer back panel (13) with screw (D). Slide drawer bottom panels (16) into grooves as per diagram.
Insert drawer front panel (12) into drawer side panel (14,15) and parts (17), then insert and secure cam lock (C) to drawer side panel (14,15) and parts (17) to lock it. Place sticker (G) and plastic cover (Q) over holes as per diagram.
Step 17 Slider arm 〉 石二一一一- 一一一二 / Slider bracket s Press down/up the slider lock on slider bracket, then insert the drawer into slider arm to lock it. Step 18 Final Assembly Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved. P.