W60CGS1CL
Insert the Cam Bolts (C) to the Top Panel (1), Metal Frame (2) (5) and the Front Drawer Panel (14) Insert the Wooden Dowel (A) to the Wooden Panel (3)(4)
Insert the Wooden Dowel (A)(B) to the Side Panel (7)(8), insert the Wooden Dowel (A) to the Side Panel (6) attached the Left Door Stopper (K) to the Side Panel (7) and Right Door Stopper on the Side Panel (8) with Screw (L) Assemble the Wooden Legs (13) to the Wooden Panel (4) by Screw (G) and Wrench (Q)
Attached the Side Panel (7)(8) to the Wooden Panel (4) with Screw (G) and Wrench (Q) Slot in the Back Board (9) to the Slots of Side Panel (7)(8)
Insert the Cam Bolts (D) and the Cam Locks (E) to the Side Panel (7) Insert the Cam Bolts (D), Cam Locks (E) to the Side Panel (8)
Place the Wooden Panel (3) on top of the Side Panel (7)(8) Slot in the the Back Panel (10) to the Wooden Panel (3)(4), attached the Side Panel (6) and secure by the Cam Locks (E)
Repeat Step #10 for the other Side Place the Top Panel (1) to the Side Panel (6) and secure it by the Cam Locks (E)
Attached the Metal Frame (2) to the Top Panel (1) and the Wooden Panel (3)(4) with Cam Locks (E) Repeat Step #13 for the Metal Frame (5) for the other side
Use the Stickers (S) to cover all the Cam Locks Attached the Door Handle (H) to the Door (11) by Screw (J), attached the Hinge (N) with Screw (P)
Assemble both Door (11) to the Metal Frame (2)(5) with Screw (P) Assemble the Drawer Side Panel (15)(16) to the Drawer Back Panel (17) with Screw (M)
Slide in the Drawer Bottom Panel (12) to the Slot of Drawer Panel (15)(16) Attached the Door Handel (H) to the Front Drawer Panel (14) with Screw (J), assemble the Front Drawer Panel (14) to the Drawer Side Panel (15)(16) and secure it by the Cam Locks (F)
Pull out the Drawers Rails and insert the Drawer as per diagram.
