Instruction Manual

ManualsBrandsWalker's Game Ear ManualsHealth and hygieneCustom Ear

OWNER’S MANUAL

Custom Units

Inserting Custom Unit

Inserting your custom unit for the first time can be challenging. Until your device is fully

inserted there can be feedback (whistle). It is recommended that you practice without the

battery until you have perfected this procedure.

Battery Insertion

The Custom Unit is designed to use a size #13 or #312 battery. A zinc air type battery is

recommended, but any type or brand may be used.

• To insert, remove adhesive sticker. Any moisture on the battery surface should be wiped

off prior to insertion. Open the battery door and insert the battery.

• To remove the battery, open the battery door and lift the battery out of the battery door.

Low Battery Indicator: When your battery voltage is low and in need of replacement you

will hear the low battery indicator. You will hear five beeps indicating that it is time to

change your battery. The warning beeps will be repeated.

Helpful Hint: It is recommended that you leave your battery door open when not using

your instruments. This will prolong the life of your batteries.

Caution: Keep batteries out of reach of children or anyone who may accidentally swallow

them. Never put batteries in your mouth for any reason. Do not store batteries in

medication containers or where they may possible by mistaken for medication and

accidentally swallowed. Never attempt to recharge non-rechargeable batteries.

To insert your Full Shell Unit

To insert your Canal Unit

To insert your Micro-Canal Unit

1. Hold the unit between

your thumb and forefinger

with the battery door

facing away from your ear.

1. Hold the unit between your

thumb and forefinger with the

battery door facing away from

your ear.

1. Hold the unit with your

thumb and forefinger with

the program button on top.

2. Gently insert the canal

portion of the unit into your

ear, rotating it slightly, to

ensure proper placement. Be

sure that the device is seated

in the ear properly and

comfortably.

2. Gently insert the canal portion of

the unit into your ear, rotating it

slightly, to ensure proper

placement. Be sure that the

device is seated in the ear

properly and comfortably.

2. Gently insert the unit into your

ear canal. Never force the unit

beyond a comfortable position.

On/Off and Volume Adjustment for Full Shell and Canal Units

On & Off: The unit is turned on and off by either opening/closing the

battery compartment or by turning the volume control past the lowest

setting.

Volume Adjustment: The volume level of the unit can be adjusted by

turning the volume control clockwise to increase the volume and counter-

clockwise to reduce the volume. The unit will beep indicating the volume

level is in the middle.

• 6 Channel Digital Circuitry

• 16 Band Graphic Equalizer

• 4 Programs

• Custom Fit

Full Shell Canal Micro-Canal

Micro-Canal

Program

Button

Battery

Compartment

Microphone

Vent

Full Shell

Battery

Compartment

Vent

Microphone

Volume

Control

Program

Button

Canal

Program Button

Battery

Compartment

Microphone

Volume

Control

Vent

Cleaning Custom Units

It is very important to keep the device as clean as possible. Wax buildup is the number one cause

of instrument failure. In order to keep it working properly it is important that you clean your

device daily.

Wipe your device clean with a soft, dry cloth, carefully removing any traces of wax and debris. A

cleaning tool is provided to assist you in cleaning the vent in your device.

Wax Protection

Wax protection systems are used to accumulate wax and debris before it reaches the

components of your device; using this system in your Custom Unit makes wax

accumulation easier to clean and can prevent damage to the internal components of

your device.

Sound Port

Wax Stop and Wax Stop Tool

Tip of Wax Stop Tool

Stop Tool has a positive and a negative tip. The

negative tip has a raised dot above it. The Wax Stop

is inserted into the sound port of the device.

Negative

Tip

Positive

Tip

On/Off and Volume Adjustment for Micro-Canal Unit

On & Off: The unit is turned on and off by opening/closing the battery compartment door.

Volume Adjustment: The Micro-Canal unit has an automatic volume control that adjusts based

off ambient noise levels.

Vent Plugs

Summary of content (2 pages)

PAGE 1
Inserting Custom Unit Inserting your custom unit for the first time can be challenging. Until your device is fully inserted there can be feedback (whistle). It is recommended that you practice without the battery until you have perfected this procedure. To insert your Full Shell Unit OWNER’S MANUAL 1. Hold the unit between your thumb and forefinger with the battery door facing away from your ear. Custom Units • 6 Channel Digital Circuitry • 16 Band Graphic Equalizer • 4 Programs • Custom Fit 2.
PAGE 2
To Insert Venting 1. Place a Wax Stop on the negative tip of the Wax Stop tool. 2. Insert the Wax Stop into the sound port of your device. 3. Remove the Wax Stop tool, leaving the Wax Stop securely in place. The custom units come with a solid vent installed. When worn in loud environments the solid vent plugs should be used for full sound protection. Venting is useful for pressure relief and providing ventilation to the ear canal to help prevent moisture buildup.