Instruction Manual
Page 9
Power On Device:
Hold the power button on your Walker’s Raptor for 2 seconds to
power on the headset.
NOTE: To pair the headset to a new phone, continue holding
the power button until you hear an audible “Pairing”.
Connect to Your Device:
Navigate to your devices Bluetooth setting and select “Raptor”
from your list of available Bluetooth devices. You will hear
an audible “Connected” sound clip conrming a successful
connection has been made.
Connect to Walker’s LINK
1
2
Connect to Walker’s LINK:
After you are connected to your headset, open the app and
press the orange Connect button.
NOTE: To connect to Walker’s LINK, you must only have
ONE Walker’s device actively connected to your phone.
3
Upon rst initial start up the Raptor will enter pairing mode automatically
and you will hear an audible “Pairing” clip when the Raptor is ready to be
connected to your device. The Raptor will also ash Red and Blue when
in Pairing mode.