ILLUSTRATED PARTS MANUAL Model MC (16 HP) (Covers Serial Numbers 01-49733 and on) TM Effective Date: 12-01-00 P/N 6000-6 Price $5.
KEY TO ABBREVIATIONS USED IN THIS MANUAL Abbreviation What it Represents º (Dimension) .................................................................................................................................... Degrees (Angle) " (Dimension) .................................................................................................................................................... inches (-) ....................................................................................................
ILLUSTRATED PARTS LIST Section of Mower Covered Page Section of Mower Covered Decals Electrical Components Tractor Decals.......................................................... 2 Electrical Assemblies Page (Chassis Components) .................................... 32 Body / Chassis Assemblies (Body Components)......................................... 34 (GHS 6.7 Bushel Components) ....................... 36 Body / Chassis Assembly (GHS Models)................. 4 (GHS 9.5 Bushel Components) ....
TRACTOR DECALS ITEM NO. PART NO. DESCRIPTION LOCATION NO. REQ’D. GHS NO. REQ’D SD Walker Product and Operation Decals 1 2 3 4 5 6 7 7802 5856 5803 5813-1 5801 5802-2 5800 RH Fender Made in USA Walker Manufacturing Logo Powerfil® GHS LH Fender Walker Mower (4 x 7-1/2) Body, RH near Seat Body, Spring Bracket Body 6.7 / 9.5 Bushel Catcher, Front 6.7 / 9.
TRACTOR DECALS Effective Date 12-01-00 Use only genuine Walker® replacement parts.
BODY / CHASSIS ASSEMBLY (GHS MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Seat Assembly 1 2 3 4 5 6 7 5103 7203 7223 7845 7846 7204 7440-5 Seat Seat Spring Plate Compression Spring (1/2 x 1) Rubber Bumper (1.375 OD x .63) Rubber Washer (3/8 ID x 1-1/4 OD x 1/8) Shoulder Bolt, Seat Mount Shock Mount (1.25 D x .75) 1 1 2 2 2 2 2 5566 5516 7516-5 5162 7517-2 PART NO. 36 5075 5070-2 5070-4 5033-2 5030-2 5031-2 5030-4 6307-1 37 Tilt Stop Strap Rear Bumper (6.
BODY / CHASSIS ASSEMBLY (GHS MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
BODY ASSEMBLY (GHS 9.5 BUSHEL MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Body Assembly (GHS 9.5 Bushel Models Only)* 1 2 3 4 5 6 7 5566 5516-15 7516-5 5162 7517-2 5845 5516-10 Tilt Stop Strap Rear Bumper (9.5) MC Twin Catcher Pivot Bushing Roller Wheel (5") Catcher Pivot Plate Rubber Bumper (1.50 OD x 1.25) Bumper Mount (C-Twin) ITEM NO. PART NO. DESCRIPTION NO.
BODY ASSEMBLY (GHS 9.5 BUSHEL MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
BODY ASSEMBLY (SD MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 8650-10 5656 3 4 5 5845 5652-1 5651-1 Bed Liner Utility Bed (Includes Items # 1 & 3) Rubber Bumper (1.50 OD x 1.25) Utility Bed Mount, LH Utility Bed Mount, RH F002 F005 F009 F014 F020 F033 F034 F042 F050 F059 F084 F091 F128 1 1 2 1 1 Rear Bumper Assembly (SD Models Only)* 6 7 8 9 7153-3 5112 5161 5162 Cover Plate Rear Bumper Bumper Pad Roller Wheel (5") PART NO. DESCRIPTION NO.
BODY ASSEMBLY (SD MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
MAIN COMPONENT POWER TRANSMISSION (GHS MODELS) ITEM NO. PART NO. DESCRIPTION NO.
MAIN COMPONENT POWER TRANSMISSION (GHS MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
MAIN COMPONENT POWER TRANSMISSION (SD MODELS) ITEM NO. PART NO. DESCRIPTION NO.
MAIN COMPONENT POWER TRANSMISSION (SD MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ENGINE GROUP ITEM NO. PART NO. DESCRIPTION NO.
ENGINE GROUP Effective Date 12-01-00 Use only genuine Walker® replacement parts.
HYDROSTATIC GROUND DRIVE ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO.
HYDROSTATIC GROUND DRIVE ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts.
STEERING CONTROL ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Transmission Spring Assemblies 1 2 3 4 5 6 7 8 9 10 11 6199 5552 5192-1 5194 6191 5195 6196 5197 5193 5191 5199 Transmission Spring Assembly (RH) (Includes Items # 2-7, F003, F287, F320 & F352) Ball Joint (1/4-28) Spring Plunger (5/32) Hole Plunger Sleeve Spring Slide (4-3/4) Compression Spring (1 x 5-1/8) Spring Slide Cap J-Bolt Washer (.750 ID x 1.00 OD x .
STEERING CONTROL ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts.
THROTTLE & CHOKE CONTROL ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Throttle & Choke Control Assemblies 1 2 3 4 5 6 7 8 9 10 8121-1 8122-1 5172 5108-7 5108-10 5108-1 5108-5 5108-11 5108-8 7108 8121 8122 Throttle Cable Choke Cable Nylon Bearing Control Lock Tab Friction Washer (.125) Control Lever, Throttle & Choke Throttle Control Knob, Red Friction Washer (.
THROTTLE & CHOKE CONTROL ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts.
PARKING BRAKE ASSEMBLY ITEM NO. PART NO. DESCRIPTION NO.
PARKING BRAKE ASSEMBLY Effective Date 12-01-00 Use only genuine Walker® replacement parts.
GHS GROUP ITEM NO. PART NO. DESCRIPTION NO. REQ’D Delivery Chute Assembly When Optional 9.5 Bushel Catcher Assembly is purchased, Item # 6 is replaced by P/N 7530 (Body Chute), and Item # 8 is replaced by P/N 8511-1 (Delivery Chute Assembly, 9.5).
GHS GROUP Effective Date 12-01-00 Use only genuine Walker® replacement parts.
GHS POWERFIL® ASSEMBLY ITEM NO. PART NO. DESCRIPTION NO.
GHS POWERFIL® ASSEMBLY Effective Date 12-01-00 Use only genuine Walker® replacement parts.
GHS 6.7 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Upper Baffle Screen Assembly (Removable) 1 2 3 4 5 6 7 8 7509-3 7505 6507 6856-1 7509-2 6512-2 7506 6509-4 Channel Bottom Mustache Spring Screen Seal, 6.7 (24") Edge Molding, 6.7 (21-3/4) Channel Top Removable Screen (6.7) Knob C-Channel (6.7) 2 2 1 1 2 1 2 1 ITEM NO. PART NO. 26 27 28 29 30 31 7533 5155-15 5522-1 6508 5522-2 5584 DESCRIPTION NO.
GHS 6.7 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts.
GHS 9.5 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Upper Baffle Screen Assembly (Removable) 1 2 3 4 5 6 7 8 7509-3 7505 7507 7856-1 7509-2 7512-2 7506 7509-4 Channel Bottom Mustache Spring 7.0 / 9.5 Screen Seal, (27-1/2) 7.0 / 9.5 Edge Molding, (26”) Channel Top 7.0 / 9.5 Removable Screen Knob 7.0 / 9.5 C-Channel 2 2 1 1 1 7504 7504-3 7504-1 7504-8 Exhaust Deflector Kit, 7.0 / 9.
GHS 9.5 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ELECTRICAL ASSEMBLIES (CHASSIS COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 5932 5975-1 5933 5910 5844 6392 5839 6390 6923 8943 PART NO. DESCRIPTION NO. REQ’D 10-24 Keps Nut 1/4-20 Keps Nut 5/16-18 Whiz Locknut 1/4-20 ESNA Wing Nut 10-24 x 1/2 PPHMS 10-24 x 5/8 PPHMS 1/4-20 x 5/8 Hex Bolt 1/4-20 x 3/4 Hex Bolt 1/4 SAE Washer 5/16-18 x 1 Hex Bolt 10-24 x 1/2 PTHMS 9 5 1 2 3 4 2 3 5 1 1 Fasteners Battery Assembly 1 2 3 4 5 6 7 8 9 10 ITEM NO. Battery Terminal Insul.
ELECTRICAL ASSEMBLIES (CHASSIS COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ELECTRICAL ASSEMBLIES (BODY COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO.
ELECTRICAL ASSEMBLIES (BODY COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ELECTRICAL ASSEMBLIES (GHS 6.7 BUSHEL COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO.
ELECTRICAL ASSEMBLIES (GHS 6.7 BUSHEL COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ELECTRICAL ASSEMBLIES (GHS 9.5 BUSHEL COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 5599 5976 5975-3 5536-2 8117 Pigtail Wire Set, Horn Grommet (3/8 ID x 11/16 OD) Cable Tie (50# x 7") Horn, Full Signal 9.5 Wire Harness Channel F002 F025 F037 F079 F085 F129 F144 F145 1 2 2 * 1 Harness & Grass-Pak® Switch Assemblies 6 7 8 9 10 11 12 13 14 15 5833 5977-2 8950-1 7835 7834 8950 5980-3 5592-11 5592-10 5592-4 5594-5 Cable Clamp (1/4) Grommet, Cut (1/8 x 3/8) Extension Wire 9.
ELECTRICAL ASSEMBLIES (GHS 9.5 BUSHEL COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ELECTRICAL CONNECTORS ITEM NO. PART NO. DESCRIPTION NO. REQ’D Electrical Wiring Service Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 5996-1 5996-4 5996-5 5940-4 5940-7 5996 5996-2 7996 5940-5 5996-0 7996-1 5996-8 5996-9 5996-10 5996-12 5996-13 5996-15 5996-16 5996-17 5996-20 5996-21 7942-4 8942 7942-1 16-14 GA Butt Conn. 16-14 GA Bullet Conn., Male 16-14 GA Bullet Conn., Female 16-14 GA Spg. Loaded Term., Female Brass Wire Clip, Female 1/4 x 16-14 GA QKS Term.
ELECTRICAL CONNECTORS Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ARMREST KIT / TOUCH-UP PAINT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 5885 Armrest Option / Kit Includes Items # 1-5, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 5886-1 5886-3 5887 5886-4 5886-2 5888 Armrest, RH 1 Cover Plate, RH 1 Mounting Bracket 1 Cover Plate, LH 1 Armrest, LH 1 Armrest Hardware Kit * (Includes Items # F305, F306, F307 & F308) ITEM NO. 42 DESCRIPTION NO.
ARMREST KIT / TOUCH-UP PAINT Effective Date 12-01-00 Use only genuine Walker® replacement parts.
COMFORT SEAT / ARMREST KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6103-5 Comfort Seat Option / Kit (Grey) Includes Items # 1, 6, fasteners listed (except as indicated; refer to NOTE) and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 6 7 8 6103-5 7203 7223 7845 7846 7203-6 7204 7440-5 Comfort Seat Seat Spring Plate Compression Spring (1/2 x 1) Rubber Bumper (1.375 OD x .
COMFORT SEAT / ARMREST KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts.
SUSPENSION SEAT KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6103-25 Suspension Seat Option / Kit Includes Items # 1-3, 5-7, 11, 14, fasteners listed (except as indicated; refer to NOTE) and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer.
SUSPENSION SEAT KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts.
LIGHT KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 5989 Light Option / Kit Includes Items # 1-10, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer.
LIGHT KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts.
CASE-HARDENED BLOWER KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6542-15 Case Hardened Blower Option / Kit Includes Items # 1-5, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 5268 NS 6545-15 6525-2 6526 Bearing (3/4) Includes Locking Collar Blower Housing (10") HT Blower Wheel (10") HT Faceplate (10" Blower) Intake Tube (6-1/2 x 2-1/2) Use only genuine Walker® replacement parts.
CASE-HARDENED BLOWER KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts.
NO CATCH DEFLECTOR KIT (6.7 BUSHEL) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 5500 No Catch Deflector Option / Kit (6.7 Bushel) Includes Items # 1-10, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 8500-5 8787-2 5500 4 5 6 7 8 9 10 5726-10 8500-8 8500-6 5500-8 5995 8500-9 5995-2 Side Bracket Deflector Knob 6.7 Deflector Assembly (Includes Items # 4 & F340) Hinge, No-Catch (6.7 / 7.
NO CATCH DEFLECTOR KIT (6.7 BUSHEL) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
NO CATCH DEFLECTOR KIT (9.5 BUSHEL) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 8500 No Catch Deflector Option / Kit (9.5 Bushel) Includes Items # 1-6, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 8500-5 8500-1 3 4 5 6 8787-2 7726-10 8500-8 8500-6 Side Bracket Deflector Assembly (9.5) (Includes Items # 4 & F340) Deflector Knob Hinge, No-Catch (9.
NO CATCH DEFLECTOR KIT (9.5 BUSHEL) Effective Date 12-01-00 Use only genuine Walker® replacement parts.
ALL-TERRAIN TIRE KIT & TIRE CHAIN SETS ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 8072 All-Terrain Tire Option / Kit Includes Items # 1-3 and instructions. May be ordered as a factory installed option, or as a kit for dealer installation. Contact your Walker dealer. 1 8070 2 3 8070-1 8070-2 8070-31 8071 All-Terrain Wheel & Tire, RH (18 x 11.00-10) AT Tire Only (18 x 11.00-10) AT Wheel Only (10 x 8.5) Wheel Spacer Plate (1/2) All-Terrain Wheel & Tire, LH (18 x 11.00-10) ITEM NO. PART NO.
ALL-TERRAIN TIRE KIT & TIRE CHAIN SETS Effective Date 12-01-00 Use only genuine Walker® replacement parts.
LUBRICATION POINTS ITEM NO. LOCATION LUBRICATION TYPE NO.
LUBRICATION POINTS Effective Date 12-01-00 Use only genuine Walker® replacement parts.
WIRING SCHEMATIC Use only genuine Walker® replacement parts.
LIMITED WARRANTY FOR WALKER COMMERCIAL RIDER MOWER 1. WHAT THIS WARRANTY COVERS, AND FOR HOW LONG: Walker Manufacturing company will, at its option, repair or replace, without charge, any part covered by this warranty which is found to be defective in material and/or workmanship within one (1) year* after date of sale to the original retail purchaser unless the product is used for rental purposes, in which case this warranty is limited to ninety (90) days.
WALKER MFG. CO. • 5925 E. HARMONY ROAD, FORT COLLINS, CO 80528 • (970) 221-5614 FORM NO. 030501 www.walkermowers.com PRINTED IN USA ©2001 WALKER MFG.