Installation Guide

walldesign.ca

The first panel can now be installed.

Your level line is your point

of reference.

Position the first panel aligning it with

the line drawn on the wall. Then start

nailing making sure to do so in the

grooves so that the nails are less visible

and to ensure a smoother finish.

In construction, joints are always

somewhat touchy areas.

Reinforce each joint with this

helpful hint.

Apply adhesive to the joints to prevent

them from separating. Then, simply

remove the excess adhesive.

You’re off to a good start.

Continue installing your panels.

Different finishing options are available. The panels can be installed on a full wall or you can leave a space for mouldings.

The inner and outer corners can be simply glued one over the other or you can choose to install them at a 45 degree

angle, which provides a more refined cachet to your final results.

For panels at the base of your walls, you can easily coordinate them with your wall panels and install a chair rail

to create a dramatic effect to your decor.

Now, sit back and admire your work... and, especially, enjoy !

WallDesign is a plus, not only for your walls, but for your quality of life !