Once upon a time, in a fairy tale world, there stood a hidden forest. On the eve of every full moon, magical and delicate sounds of light were heard bouncing and reverberating through the trees. These sounds carry artifacts of notes moving backward and stretching through time. They are referred to as, Lore. Create the soundtrack to your storybook adventure with the Lore Reverse Soundscape Generator.
9 volt DC, Center Neg. 300mA min* Output Jack Bypass LED Bypass Switch Input Jack Rate LED Tap/Dive/Rise *The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
The Lore employs two analog feedback paths which allow each program to incorporate a unique mix of affected and unaffected feedback. The two feedback paths interact and build off of each other organically, offering the user a wide array of sounds and behaviors to experiment with.
Programs I. Reverse Delay into Reverse Reverb. Program 1 combines reverse delay with reverse reverb with a focus on organically interacting feedback paths. Space and ambiance build as the signal is reversed, rereversed, reverberated, and reversed again within the feedback network. Experiment with the X knob to control how reversed your delay trails are with left being least reversed and right being fully reversed. Lots of fun with big, eerie minor chords! II. Reverse Delay into Octave Up Reverb.
lower octave to the reverse reverb. Conversely, use the Regen knob to add an octave up to the reverse reverb decay. Control the decay of the forward reverb with the X knob. To channel all things ambient, experiment with dynamic picking and strumming techniques with the mix fully wet for ethereal drones and pads. V. Pitch Delay into Pitch Delay.
Controls Feedback: Controls the amount of gain in the first feedback path. Programs 1, 2, 3 – Controls the amount of delay repeats. Program 4 – Controls the amount of octave down added to reverse reverb along with the reverse reverb feedback amount. Program 5 – Controls the amount of pitched delay repeats. Regen (Regeneration): Controls the amount of gain in the second feedback path. Program 1 – Controls the feedback of the reverse reverb.
X: The X knob changes jobs depending on which program is selected. Program 1 – Control how reversed your delay trails are: left is least reversed, right is fully reversed.
Tap Tempo: Tap to control delay or reverb time (depending on what program you’re in). The tap LED will blink with the tapped tempo, or the tempo set by the Time knob.
WALRUSAUDIO.COM Got questions? help@walrusaudio.com WALRUSAUDIO.COM Need a repair? repairs@walrusaudio.com This product comes with a limited lifetime warranty. Scan the QR code below for more info. Got questions or need a repair? help@walrusaudio.com. All our pedals come with a limited lifetime warranty. Visit walrusaudio.com/pages/warranty-and-repair for more info.
