User Manual

Factory Reset - Use the following procedure to restore the pedal to its factory settings.
1. Hold both stomp switches while applying power.
2. Continue holding both stomp switches for longer than 10 seconds.
3. After 10 or more seconds, release both stomp switches and your pedal is now reset.
Walrusaudio.io is a simple interface to update your pedal’s firmware and to load your own cabinet
IRs. To connect to your computer, you’ll need a micro USB sync cable. Some micro USB cables are
only designed to charge devices. Make sure you have one that is able to sync for your computer to
recognize the pedal.
To upload your own speaker IRs:
1. Connect the USB cable to the ACS1
and power on the pedal.
2. Click on the ACS1 pedal image.
3. Click on IR Manager.
4. Find the slot that you wish to change
and click edit.
5. Click Choose IR file to upload your IR.
Note the ACS1 accepts 24-bit 48kHz .wav
IR files.
*Note: To use all features of walrusaudio.io, you must be connected through a desktop computer
running Google Chrome. Mobile devices do not offer syncing and updating capabilities.
GLOBAL PREFERENCES
WALRUSAUDIO.IO