User Manual

The cabs are broken into two groups of three. The “front” three are accessed by simply moving the
toggle switch to the desired position. The “back” three are accessed by holding down the bypass
switch while moving the cab toggle. To help make this more intuitive, we have laid these out based
on the amp we like using them with, but there is no right or wrong. Mix and match however you like!
Front Cabs
A: Walrus Custom Fender
®
Deluxe Style
B: Walrus Custom Marshall
®
4x12 Style
C: Walrus Custom Vox
®
Green Back Style
L + R Switch - The L+R switch is an important control as it selects which channel the controls will
affect. For setting up the ACS1 with similar sounds on both left and right channels, set this switch to
the “+” position. Any changes made to a control will sync that parameter across both channels. Select
an amp and it will be applied to both sides. Dial-in the tone stack, and it will match on both sides,
and so on.
Use the outer switch positions, “L” and “R”, for crafting different amp sounds on the left and right
channels. Set the switch to the “L” position and use the controls to dial in the desired sound for the
left channel. Similarly, set the switch to the “R” position and use the controls to dial in the desired
sound for the right channel. You can use this process for things like selecting different cabs for each
channel all the way to dialing in a totally different amp and cab combo on the left and right side.
Use the volume knob on each side for balancing the overall level of each amp when crafting unique
sounds on the left and right channels.
Back Cabs
A: Walrus Custom Fender
®
Super Reverb Style
B: Walrus Custom Two Rock
®
Style
C: Walrus Custom Vox
®
Blue Back Style