User's Manual

900-000230
Rev 0.7
(preliminary)
xBR V4 Installation and User Guide
Page 11 of 18
4.2 Connection Ports
 Ethernet 10/100 RJ-45 (POE): 100m Max. cable length
 Ethernet 100BASE-FX (optical) LC Connector: 300m Max. cable length,
multi-mode fiber
 10 SMA Antennal Ports: (1 transmit, 8 receive, 1 Wi-Fi)
 Circular Connector: 5 pin
4.3 RF Frequencies
 RX: 2401, 2424, 2450, 2474 MHz
 TX: 2482 MHz
 Wi-Fi: 802.11a/n. 5GHz only
4.4 Operating Conditions
Temperature:
 Operating: 0°C to 40°C (32°F to 104°F)
 Storage: -10°C to 70°C (14°F to 158°F)
 Relative Humidity: 5% to 95% non-condensing
 Altitude: 2,000 m (6561 ft.) @28°C (82.4°F)
4.5 Power
Power over Ethernet (IEEE, 802.3af compliant)
PoE 48Vdc, 0.5A max
Power Connector, circular, 5-pin:
The 5 pin power connector has 2 separate sets of input pins. Use pins 1 and 2 when
the supplied voltage is between 20 and 48Vdc. Use pins 3 and 4 when the supplied
voltage is between 14 and 16Vdc. Apply power to only one set of pins at a time. See
the Connection Guide (Section 6) for additional information.
DC Pins 1,2: 20-48Vdc, 1A max (Class 2 or LPS)
NOTE: If a power adapter other than one provided by the manufacturer is used in the US or
Canada, it should be cULus (NRTL) Listed, with an output rated 20-48Vdc maximum, minimum
1.0A, Marked “LPS” or “Class 2”, output rated SELV, non-energy hazardous, and suitable for
connection to a standard power receptacle in the US and Canada.