User's Manual

900-000230
Rev 0.7
(preliminary)
xBR V4 Installation and User Guide
Page 16 of 18
6 Connection Guide
The xBR V4 Long Range Reader has several connection points as shown in Figure 8 and
Figure 9 - xBR V4 Connections:
Figure 8 - xBR V4 RF Connections
Transmit Antenna SMA – This is a female SMA connection for the transmit antenna. The
transmit antenna must be installed at all times when the unit is powered up and
transmitting. Transmitting without the antenna installed may damage the unit.
This antenna must be of an approved or supplied type. Use of an unauthorized antenna is
not allowed.
Receive Antennas 0 - 7 SMA – These are female SMA connections for the receive
antenna(s).
Wi-Fi Antenna SMA – This is a female SMA connection for the Wi-Fi antenna. The Wi-Fi
antenna must be installed at all times when the unit is powered up and Wi-Fi is enabled.
Operating Wi-Fi without the antenna installed may damage the unit.
This antenna must be of an approved or supplied type. Use of an unauthorized antenna is
not allowed.