User's Manual

900-000230
Rev 0.7
(preliminary)
xBR V4 Installation and User Guide
Page 17 of 18
Figure 9 - xBR V4 Connections
Ethernet 10/100 RJ-45 (PoE) – This is an RJ-45 jack for an Ethernet connection with
optional Power over Ethernet (PoE)
Ethernet 100BASE-FX – This is an LC connection for an optical Ethernet connection.
DC Power Connector – This connector provides a means of powering the unit if PoE is not
available. Connect only a supplied or approved power supply.
The connector on the V4 is a Lemo EGG.1B.305.CYM. The mating connector is a Lemo
FGG.1B.305.CLAD52Z (male pins).
When connecting a 20 to 48Vdc power supply, use pins 1 and 2 on the connector (pin 1
positive, pin 2 negative). Leave the other pins unconnected (Figure 10).
Figure 10 – DC Power Connector – 20 to 48Vdc Connection