Operating instructions

Contents
1 General Information
1.1 Identification of Model Version
1.2 Normal Use
1.3 Improper Use
2 Technical Description
3 Safety Instructions
4 Connection of Input Lines
5 Operation
5.1 Safety Instructions
5.2 Requirements at the Start and Finish of Operation
5.3 Spray Pattern Test
5.4 Spray Pattern Adjustment
5.5 Retooling the Spray Gun / Repairs
6 Cleaning
6.1 Safety Warnings
6.2 General Cleaning Procedure
6.3 Routine Cleaning
7 Troubleshooting
8 Disposal of Cleaning and Servicing Substances
9 Specifications
Listing of Replacement Parts
Item Article No. Discription
1 V 24 329 05 000 Air cap nut
2 V 24 329 04 . . 0* Air cap
3 V 09 101 75 000 Air cap seal
4 V 24 329 01 . . 3* Material nozzle
5 V 11 306 21 . . 3* Material needle
6 V 24 321 01 000 Gun body
7 V 10 361 08 000 Needle packing
8 V 01 101 01 000 Needle gland nut
9 V 10 306 06 000 Driving bushing
10 V 10 306 08 000 Counter-screw
11 V 10 902 00 000 Wide jet regulator
12 V 24 321 05 000 Lever shank screw
13 V 24 321 06 000 Distance bushing
14 V 10 301 09 000 Lever screw
15 V 24 321 03 000 Double nipple
16 V 00 101 03 000 Cap nut
17 V 00 101 02 003 Hose grommet
18 V 24 381 05 000 Double nipple
19 V 00 101 12 005 Cap nut
20 V 24 321 09 003 Hose grommet
21 V 24 306 05 000 Spring bushing
22 V 10 306 04 000 Needle spring
23 V 20 001 06 000 Counter-screw
24 V 10 904 04 000 Valve housing
25 V 10 304 03 000 Valve spring
26 V 10 904 02 000 Valve cone
27 V 10 304 01 000 Valve shaft
28 V 09 101 02 020 Packing
29 V 10 901 06 000 Valve compression gland
30 V 00 101 01 000 Double nipple
31 V 09 101 76 010 Seal
32 V 24 321 04 000 Trigger
The wearing parts are shown in boldface print in the list of the replacement parts. We
recommand that wearing parts are held on stock.
Nozzle sets constist of air control head, material nozzle and material needle.
Nozzle sets No.: V 15 019 02 . . 3
* Please quote the respective sizes when ordering replacements.
(Nozzle sizes optional:0,5 • 0,8 • 1,0 • 1,2 • 1,5 • 1,8 • 2,0 • 2,5 mm ø)