Operating Instructions
Table Of Contents
- 1. Wichtige Hinweise im Umgang mit Waffen (Sicherheitshinweise)
- 2. Gewährleistungsbestimmungen
- 3. Pflege
- 4. Spannen und Laden / Ladezustandsanzeige
- 5. Entladen
- 6. Abzug
- 7. Trockentrainingseinrichtung
- 8. Visierung
- 9. Druckluftversorgung / Druckluftbehälter
- 10. Austausch des Hinterschafts / seitliche Auslagerung (nur Alutec)
- 11. Einstellung der Schaftkappe und Schaftlänge
- 12. Anpassung der Schaftbacke
- 13. Justierung des Griffes
- 14. Vorderschafterhöhung fürs Stehendschießen
- 15. Vorderschaft fürs Auflageschießen
- 16. Brustanlage für Schaftkappe
- 17. Zubehör
- 18. Ausstattung/Sonderzubehör
- 19. Technische Daten
- 1 Important information on handling firearms (safety instructions)
- 2 Warranty provisions
- 3 Care
- 4 Cocking and loading / loading status indicator
- 5 Unloading
- 6 Trigger
- 7 Setting for dry firing
- 8 Sights
- 9 Compressed air supply / compressed air cylinder
- Changing the butt stock / cast (Alutec only)
- 11 Adjusting the butt plate and stock length
- 12 Adjusting the cheek piece
- 13 Adjusting the grip
- 14 Fore-end elevation for shooting in the standing position
- 15 Fore-end for shooting from a rest
- 16 Chest rest for butt plate
- 17 Accessories
- 18 Equipment / special accessories
- 19 Technical data
- 1 Observaciones importantes sobre el manejo de armas (instrucciones de seguridad)
- 3 Conservación
- 4 Amartillar y cargar / Indicador de carga
- 5 Descargar
- 6 Gatillo
- 7 Ajustar para entrenamiento en seco
- 8 Mira
- 9 Abastecimiento de aire comprimido / cartucho de aire comprimido
- 10 Cambio de la culata trasera / Ajuste lateral (sólo Alutec)
- 11 Ajuste de la cantonera y de la longitud de la culata
- 12 Ajuste de la carrillera
- 13 Ajuste de la empuñadura
- 14 Elevación de la culata delantera para tirar de pie
- 15 Culata delantera para tirar con soporte
- 16 Apoyo de pecho para la cantonera
- 17 Accesorios
- 18 Equipo / Accesorios especiales
- 19 Datos técnicos
- 1 Consignes importantes relatives à l’utilisation d’armes (consignes de sécurité)
- 2 Conditions de garantie
- 3 Entretien
- 4 Armer et charger / indicateur de charge
- 5 Déchargement
- 6 Détente
- 7 Dispositif de tir sans munition
- 8 Dispositif de visée
- 9 Alimentation en air comprimé / cartouche d’air comprimé
- 10 Remplacement de la crosse / du système de déport (seulement Alutec)
- 11 Réglage de la plaque de couche et de la longueur de la crosse
- 12 Adaptation de la crosse à joue
- 13 Ajustement de la poignée
- 14 Élévation du fût pour le tir debout
- 15 Fût pour le tir sur appui
- 16 Dispositif d’appui pour plaque de couche
- 17 Accessoires
- 18 Équipement/accessoires spéciaux
- 19 Caractéristiques techniques
- 1 Avvertenze importanti per l’utilizzo di armi (indicazioni di sicurezza)
- 2 Condizioni di garanzia
- 3 Manutenzione
- 4 Armamento e caricamento / Indicatore dello stato di carico
- 5 Scaricamento
- 6 Grilletto
- 7 Addestramento con tiro a secco
- 8 Organi di mira
- 9 Alimentazione d'aria compressa / serbatoio a pressione
- 10 Sostituzione del calcio posteriore / spostamento laterale (solo Alutec)
- 11 Regolazione del calciolo e della lunghezza del calcio
- 12 Adattamento della placca poggiaguancia
- 13 Messa a punto dell'impugnatura
- 14 Elevazione del fusto per il tiro in piedi
- 15 Fusto per il tiro in appoggio
- 16 Dispositivo d'appoggio per il calciolo
- 17 Accessori
- 18 Dotazioni/Accessori speciali
- 19 Caratteristiche tecniche

LG400 – Operating Instructions
-44-
service life can be extended a single time for another 10 years. Thus a total maxi-
mum service life of 20 years is possible.
The service life of a compressed air cylinder that is more than 20 years old cannot
be extended by means of repeated testing. When the maximum permissible service
has been reached, the cylinder must be emptied in a safe manner and discarded.
Additional important information on the use of compressed air cylinders
• If you transport a compressed air cylinder by airplane or send it by mail, it must
be empty.
• Check the pressure level indicator of a compressed air cylinder only when your
air rifle is unloaded and decocked. The pressure level indicator has an accuracy
of ±10%. Temperature variations can also affect the level shown.
• Repairs on compressed air cylinders must be carried out only by the manufac-
turer, using original replacement parts. In the case of noncompliance the
manufacturer shall have no liability and the warranty shall be null and void.
• Do not alter the surface of the compressed air cylinder. In particular, do not
engrave it or apply abrasives. This can damage the cylinder and create a safety
risk.
• Inspect the compressed air cylinder for cracks and damage before each use.
• Protect the compressed air cylinder against damage of any kind.
10 Changing the butt stock / cast
(Alutec only)
The stock is divided, allowing the butt
stock to be replaced by other variants
(special accessories). In addition, this
allows the butt stock to be moved
laterally by eight millimeters to the left or
right. To do this, remove the entire cheek










